TankSmithTankSmith
Water Tank Systems · Philippines

About TankSmith: Turnkey Water Tank and Pump Installer in the Philippines

TankSmith is a Philippines-based turnkey installer for modular water tank systems, FRP, GRP, HDG steel, and stainless steel bolted panels, sized from 1,000 liters to 500,000 liters, paired with matching booster pump systems. One team supplies, installs, and commissions both the storage and pressure side under a single contract, founded in 2024 and serving warehouses, factories, hotels, hospitals, schools, condominiums, and government facilities nationwide.

Who TankSmith Is

TankSmith is a Philippines-based turnkey installer for modular water tank systems and the booster pump systems that pressurize them. The brand is operated by a Philippines-registered general contractor and industrial supplier headquartered in the National Capital Region, and was founded in 2024. TankSmith specializes in commercial and industrial modular water tank systems built from FRP, GRP, hot-dip galvanized (HDG) steel, or stainless steel bolted panels, ranging from 1,000 liters to 500,000 liters per system. What sets TankSmith apart is single-team accountability: the same team that supplies the tank also supplies the matching vertical multistage booster pump and VFD control panel, installs both, and commissions the combined system under one contract. Buyers do not need to coordinate a separate tank fabricator and a separate pump contractor, or absorb the risk of two vendors disagreeing when the mechanical and electrical sides do not match. TankSmith's work covers warehouses, factories, hotels, hospitals, schools, condominiums, and government facilities nationwide, from Metro Manila to PEZA and SBMA freeport industrial estates. The panels themselves come from ISO 9001 certified partner factories and carry WRAS certification for potable water service up to 65 degrees Celsius, with NSF-compliant liners available. Every installation is backed by a 3-year panel warranty and a 20 to 25 year design life, figures TankSmith states plainly rather than describing the system only in general terms.

What TankSmith Installs

TankSmith's product line covers both sides of a water tank installation: the storage tank and the pressure pump that delivers water from it. On the tank side, TankSmith installs modular bolted panel tanks in FRP, GRP, hot-dip galvanized steel, or stainless steel 304/316, sized from 1,000 liters up to 500,000 liters per system, selected by site load, footprint, and water quality requirement. On the pump side, TankSmith installs vertical multistage centrifugal booster pumps from the CDL/CDLF series, built in SS304, with motor ratings from 0.37 kW to 200 kW depending on the building's demand. Pumps run under VFD duplex control panels rated IP54, with pressure feedback and auto-alternation between pump units so that one pump does not carry the full duty cycle alone. The result is a turnkey pump-plus-tank package: mechanical installation, electrical wiring and panel setup, and final commissioning, delivered and documented under one contract rather than split across a tank supplier and a separate electrical contractor. This matters most on retrofit sites, such as rooftop installations on existing hotels or condominiums, where the tank and pump have to be sized and sequenced together to fit tight access and existing plumbing, not specified in isolation.

Certifications and Standards

TankSmith's tank panels are WRAS-certified for potable water contact up to 65 degrees Celsius, the standard most Philippine procurement teams ask for when a tank will hold drinking water rather than process or fire reserve water. NSF-compliant liners are available for installations where that is the specified requirement. The panels are produced under an ISO 9001 certified manufacturer quality management system, and are TUV SUD tested before they reach a Philippine site. On warranty, TankSmith backs every FRP panel tank with a 3-year warranty, and states a design life of 20 to 25 years for a correctly installed and maintained system, a figure based on the panel material and installation method rather than a marketing estimate. Panels are sourced through vetted, ISO 9001 certified partner factories rather than manufactured in-house, which TankSmith states directly rather than implying local manufacture it does not do.

Industries TankSmith Serves

TankSmith sizes and installs systems for seven recurring site types. Commercial laundries get tanks sized to kg per day linen throughput rather than a flat capacity guess. Hotels and resorts most often need a rooftop retrofit with a booster pump integrated into existing plumbing without a long shutdown. Hospitals and clinics need redundancy and a code-compliant fire reserve volume, since a single point of failure is not acceptable on a site with inpatients. Food manufacturing sites need WRAS-compliant potable water systems where the water contacts product or packaging. Warehouses and manufacturing plants most often need fire reserve capacity alongside process water. Condominiums and high-rise buildings need rooftop systems installed through tight access, often during a retrofit rather than new construction. TankSmith also serves industrial estates inside SBMA, Clark, Cavite, and Batangas, including PEZA and freeport-registered facilities, where commissioning documentation has to match the site's zone requirements. Across all seven, the same single-contract model applies: TankSmith prices, installs, and commissions the tank and pump together rather than quoting the tank alone and leaving the buyer to find a separate pump contractor.

Where TankSmith Operates

TankSmith operates nationwide in the Philippines, with installation teams covering the National Capital Region, the rest of Luzon, Visayas, and Mindanao. A meaningful share of TankSmith's work sits inside PEZA-registered and freeport industrial estates, including SBMA (Subic), Clark, Cavite, and Batangas, where factories and warehouses need both the storage tank and the pressure pump commissioned to the estate's own requirements. For buyers outside Metro Manila, this means TankSmith does not treat anything outside the capital as a remote or special-case job: the same accountable installation team that handles an NCR condominium retrofit handles a factory inside a Clark freeport zone. Site readiness, civil works, and access still affect scheduling regardless of region, addressed directly with each buyer before an installation date is confirmed. TankSmith does not publish a list of named past clients or project counts on this page; buyers who need references for a specific region or vertical can request them directly during the quote process rather than relying on marketing claims alone.

Installation Timeline and Warranty

A typical TankSmith installation runs 5 to 14 days from mobilization to commissioning, for systems ranging from 20 KL to 500 KL, with the exact duration set by tank capacity and how ready the site's civil works are before TankSmith arrives. A site with its foundation, base slab, and electrical supply already in place moves toward the 5-day end of that range; a site that still needs civil work coordinated alongside the tank and pump installation moves toward 14 days or beyond. Once installed, every FRP panel tank carries a 3-year warranty, and TankSmith states a 20 to 25 year design life for the system as a whole when installed and maintained as specified. TankSmith does not publish milestone billing schedules publicly; payment structure is handled directly with each buyer during the quoting process rather than disclosed as a generic schedule that may not fit every project's scope.

Frequently Asked Questions

TankSmith is a Philippines-based turnkey installer for modular water tank systems and the booster pump systems that pressurize them. It installs FRP, GRP, hot-dip galvanized steel, and stainless steel bolted panel tanks from 1,000 liters to 500,000 liters, paired with vertical multistage booster pumps and VFD duplex control panels. One team handles supply, installation, and commissioning for both the tank and the pump under a single contract, serving warehouses, factories, hotels, hospitals, schools, condominiums, and government facilities nationwide in the Philippines.

TankSmith installs modular bolted panel tanks in four materials: FRP (fiberglass reinforced plastic), GRP/SMC (sheet moulded compound), hot-dip galvanized (HDG) steel, and stainless steel 304 or 316. All four are offered across the same capacity range, from 1,000 liters to 500,000 liters per system, and the panels are WRAS-certified for potable water contact up to 65 degrees Celsius, with NSF-compliant liners available where specified. Material choice is typically driven by water quality requirements, budget, and whether the tank will hold potable water, process water, or fire reserve volume.

A typical TankSmith installation takes 5 to 14 days from mobilization to commissioning, for tank systems between 20 KL and 500 KL. The exact duration depends on the tank's capacity and how far along the site's civil works are before installation starts. Sites with the foundation, base slab, and electrical supply already prepared tend toward the shorter end of that range, while sites that need civil work coordinated alongside the tank and pump installation take longer.

TankSmith backs every FRP panel tank with a 3-year warranty and states a design life of 20 to 25 years for a correctly installed and maintained system. This applies to the tank structure itself; pump and control panel components are covered separately as part of the turnkey installation contract. Design life and warranty terms are confirmed in writing during the quote process for each project's specific scope and site conditions.

Yes. TankSmith's turnkey model covers both sides of the installation: the modular tank and the vertical multistage booster pump system that pressurizes it. Pumps are CDL/CDLF series centrifugal pumps built in SS304, rated from 0.37 kW to 200 kW, running under VFD duplex control panels rated IP54 with pressure feedback and auto-alternation. Mechanical installation, electrical wiring, and commissioning for both the tank and the pump are delivered under one contract, so buyers do not need to coordinate a separate tank fabricator and a separate pump or electrical contractor.

TankSmith operates nationwide, covering the National Capital Region, the rest of Luzon, Visayas, and Mindanao. A significant share of its installations sit inside PEZA-registered and freeport industrial estates, including SBMA (Subic), Clark, Cavite, and Batangas, where factories and warehouses need the tank and pump system commissioned to the estate's own requirements. Outside Metro Manila, TankSmith uses the same installation team and single-contract model rather than treating provincial or freeport sites as a special case, though civil readiness and site access still affect final scheduling for any location.

Get a Quote

Send your capacity, site conditions, and timeline for a sized quotation.

Request a Quote

Browse more configurations in the water tank systems directory.

Found this useful? Add TankSmith as a Preferred Source on Google so our tank sizing guides show up first next time you search.