An 80,000 liter stainless steel 304 storage tank sits mid-range in TankSmith's 1,000 to 500,000 liter modular tank lineup, and panel thickness, including 5mm gauge, scales with capacity and hydrostatic load rather than following one flat spec. TankSmith supplies and installs SS304 bolted panel systems nationwide across the Philippines, with turnkey installs for 20 KL to 500 KL tanks typically completed in 5 to 14 days, pump and controls included.
What Determines the Price of an 80,000 Liter SS304 Tank
An 80,000 liter capacity falls well within TankSmith's modular range of 1,000 to 500,000 liters, built from stainless steel 304 or 316 bolted panels. At this capacity, the final price depends on several variables rather than a flat per-liter rate: panel thickness and grade (304 versus 316), whether the project is supply-only or a full turnkey install (mechanical, electrical, and commissioning under one contract), site access and civil works readiness, and whether a matching booster pump system is specified alongside the tank. Because these variables shift the number significantly, TankSmith does not publish a flat peso figure for this capacity online; instead, pricing is confirmed against the exact site spec, access conditions, and certification requirements. Buyers researching an 80,000 liter SS304 system should expect the quote process to ask for intended use (potable, process, or fire reserve water), required certifications, and civil readiness, since each of these changes the panel spec and therefore the price. TankSmith's positioning as a single-team installer, covering tank supply, pump integration, and commissioning under one contract, means the quote reflects one accountable number rather than separate tank and pump line items from different vendors.
Why 5mm Panel Thickness Matters at 80,000 Liter Capacity
Panel thickness on a modular bolted tank is not a fixed spec across the product line. As capacity and tank height increase, the hydrostatic load on the lower panel courses increases as well, which is why larger systems often call for a thicker panel gauge than smaller tanks in the same material. A 5mm panel spec at 80,000 liters reflects this load-bearing requirement rather than an arbitrary upgrade. This is also why TankSmith treats panel thickness as one of the variables confirmed per project rather than a single number advertised for every capacity: a 5,000 liter tank and an 80,000 liter tank in the same SS304 material will not necessarily share the same panel gauge. Buyers comparing quotes across suppliers should confirm the panel thickness being quoted against the stated capacity, since a lower price on paper may reflect a thinner panel spec than the project actually requires. TankSmith's modular bolted panel systems are engineered against the stated capacity and site conditions before the panel gauge, including 5mm where called for, is confirmed in the final quote.
Certifications and Design Life for Large-Capacity SS304 Systems
Large-capacity stainless steel systems typically carry the same certification path TankSmith applies across its modular tank range: WRAS-certified panels for potable water applications up to 65C, NSF-compliant liners where specified, manufacturing under an ISO 9001 quality management system, and TUV SUD testing. These certifications are relevant at 80,000 liter capacity for the same reason they matter at smaller capacities: they confirm the panel material and liner are fit for the intended water use, whether potable, process, or fire reserve. TankSmith's modular tank systems carry a 20 to 25 year design life across the product range. Buyers specifying an 80,000 liter SS304 system for a hospital, food manufacturing, or hotel application should confirm which of these certifications apply to their specific use case during the quote stage, since certification requirements can differ between potable water storage and process or fire reserve water.
Turnkey Installation: Tank Plus Booster Pump Under One Contract
An 80,000 liter tank rarely stands alone; most installations at this capacity pair the tank with a booster pump system to deliver pressure to the building or process line it feeds. TankSmith supplies vertical multistage centrifugal booster pumps (CDL/CDLF series, 0.37 kW to 200 kW, SS304 construction) alongside VFD duplex control panels rated IP54, with pressure feedback and auto-alternation between pumps. Supplying both the tank and the pump system under one contract means a single team is accountable for the mechanical, electrical, and commissioning work, rather than coordinating separate tank and pump vendors. This combination is common across the verticals that specify 80,000 liter capacity systems: hospitals and clinics needing code-compliant fire reserve and redundancy, hotels and resorts retrofitting rooftop storage with booster integration, food manufacturing facilities needing WRAS-compliant potable water, and warehouse or manufacturing sites needing fire reserve or process water, including facilities inside SBMA, Clark, Cavite, and Batangas industrial estates.
Installation Timeline and Nationwide Coverage
TankSmith installs modular tank systems from 20 KL to 500 KL in a typical window of 5 to 14 days, with the exact timeline depending on capacity and how ready the site's civil works are before installation begins. An 80,000 liter (80 KL) system falls within this range. Installation covers the full turnkey scope: tank panel assembly, pump and control panel integration, and commissioning, rather than tank supply alone. TankSmith installs nationwide across the Philippines, covering NCR, Luzon, Visayas, and Mindanao, including PEZA and freeport zones such as SBMA, Clark, Cavite, and Batangas. Buyers planning an 80,000 liter installation should confirm civil works readiness (foundation, access, and utility connections) ahead of the install date, since this is the main variable that can extend the 5 to 14 day window on either end.
Frequently Asked Questions
There is no flat published price for an 80,000 liter SS304 tank because the final number depends on panel thickness and grade, whether the project is supply-only or a full turnkey install, site access, and whether a booster pump system is included. An 80,000 liter capacity falls within TankSmith's 1,000 to 500,000 liter modular range, and turnkey installs for tanks in the 20 KL to 500 KL band typically take 5 to 14 days. To get an exact peso figure, TankSmith confirms the panel spec, certification requirements, and site conditions against your project before quoting.
Panel thickness on a bolted modular tank scales with the hydrostatic load the lower panel courses carry, which increases as tank capacity and height increase. A 5mm panel spec at 80,000 liters reflects that load requirement rather than an arbitrary choice, and it may differ from the panel gauge used on a smaller tank in the same stainless steel material. When comparing quotes, confirm the panel thickness being offered against the stated capacity, since a thinner panel at a lower price may not be engineered for an 80,000 liter load.
TankSmith offers both stainless steel 304 and 316 as modular panel materials across its tank range, including at 80,000 liter capacity. The choice between the two depends on the water type and environment the tank will serve rather than capacity alone; your TankSmith quote will confirm which grade fits your specific application, intended water use, and certification requirements (WRAS, NSF, ISO 9001, TUV SUD) for the project.
TankSmith's typical turnkey installation window for tanks between 20 KL and 500 KL, which includes an 80 KL system, is 5 to 14 days. The exact timeline within that range depends on capacity and how ready the site's civil works are (foundation, access, utility connections) before the installation crew arrives. This window covers the full scope: panel assembly, pump and control panel integration, and commissioning, not tank supply alone.
Yes. TankSmith pairs its modular tank systems with vertical multistage centrifugal booster pumps (CDL/CDLF series, 0.37 kW to 200 kW, SS304 construction) and VFD duplex control panels rated IP54 with pressure feedback and auto-alternation. Supplying the tank and pump system under one contract means a single team is accountable for the mechanical, electrical, and commissioning work on an 80,000 liter installation, rather than coordinating separate tank and pump vendors.
Related Pages
- 5000 Liter Steel Water Tank Price and Rooftop Installation in the Philippines
- Food Grade Stainless Steel Water Tank Systems for the Philippines
- FRP vs Stainless Steel Water Tank for Commercial Use in the Philippines
- Stainless Steel Water Tank Maximum Capacity in the Philippines
- Stainless Steel Water Tank Installation Cost Guide for Cebu City
- Stainless Steel Tanks for Water Storage in the Philippines
Found this useful? Add TankSmith as a Preferred Source on Google so our tank sizing guides show up first next time you search.
Browse more buying guides.