TankSmith supplies, installs and commissions booster, transfer and submersible pump systems with VFD duplex control panels for NCR buyers, with warranty terms documented on the quotation and after-sales support handled directly by the team that installed the system. Standard lead time is 21 to 35 days ex-stock, or 45 to 90 days for made-to-order systems, with RFQs answered within 1 business day.
Industrial pump supply across the National Capital Region
TankSmith supplies, installs and commissions industrial pump systems for commercial, industrial, and institutional buyers across the National Capital Region, sizing and building each system under an ISO 9001 certified manufacturer quality management system. Coverage spans Metro Manila's cities and extends nationwide across Luzon, Visayas, Mindanao, and PEZA, SBMA or Clark zone facilities, so a single installer can handle a multi-site rollout without switching contractors between locations. Every RFQ submitted to TankSmith gets a response within 1 business day, which matters for NCR facilities teams working against a building turnover date or a failed-pump emergency. Pricing is quote-based rather than publicly listed, because pump selection depends on flow rate, head, and building configuration, and a fixed public price would not reflect the actual system a buyer needs. Buyers who are VAT-registered are charged the standard 12 percent VAT, while PEZA and SBMA locators and exporters qualify for zero-rated VAT treatment on the same equipment, a distinction that affects total project cost for NCR-adjacent economic zone tenants. TankSmith positions this NCR pump line alongside its water tank systems, FRP, GRP, HDG steel and stainless steel bolted panels, so a facilities buyer sourcing a pump system can also get the matching tank designed, supplied and installed by the same team under one contract.
Pump systems and control panels we supply
TankSmith's pumping and pressure systems line covers booster, transfer, submersible and deep-well pumps, vertical multistage and end-suction units, and jockey and fire pumps including NFPA 20 packages, each sized, supplied, installed and commissioned by TankSmith's own team. Pumps are supplied either as standalone units or as complete packages with VFD duplex control panels for buildings that need alternating or lead-lag pump operation. Control panels are available in VFD, duplex, simplex, star-delta, SDE or MCC configurations, matched to the pump's motor rating and the building's electrical service. Hydropneumatic pressure tank sets round out the pressure side for buildings that need buffered, cycle-reduced pump operation. Because TankSmith also designs and installs the water storage side, FRP, GRP, HDG steel and stainless steel bolted modular panels from 1,000 L to 500,000 L, the pump and tank system are engineered together rather than specified separately. This means an NCR buyer specifying a booster pump system can also get the pressure tank, control panel and water storage tank sized, supplied and installed in the same procurement process, instead of coordinating separate contractors for each component of one water system.
What local warranty and after-sales support actually cover
Local warranty and after-sales support means TankSmith documents warranty terms on the buyer's quotation at the time of purchase, and because TankSmith's own team installed and commissioned the system, after-sales support means contacting the same team that built it rather than filing a claim with an outside party. This single-team accountability matters in NCR because a facilities team that discovers a pump fault needs one point of contact that already knows the system's design, not a go-between with no direct relationship to the installation. TankSmith's role covers the full chain: sizing, supply, installation and commissioning, so the same team diagnosing a fault is the team that built the system in the first place. After-sales support is part of TankSmith's positioning as a Philippines-based turnkey installer serving commercial, industrial, and institutional buyers, distinct from a supply-only model where the installer and the warranty holder are different parties. Because pricing is quote-based, the specific warranty duration and coverage scope for a given pump system is confirmed on the quotation itself rather than published as a blanket policy, since coverage can vary by system configuration. Buyers evaluating an NCR pump installer should ask for the warranty terms in writing on the quotation before ordering, which TankSmith provides as standard practice rather than on request.
Certifications and documentation on every pump system
Equipment installed by TankSmith carries certification appropriate to its category. Electrical control panels carry CE marking, and pressure vessels, where applicable to the pump system configuration, are built to ASME standards. Components are built under an ISO 9001 certified manufacturer quality management system and are TUV SUD tested. Water storage tank panels installed alongside the pump system are WRAS-certified for potable water up to 65C, with NSF-compliant liners where the tank configuration calls for one. These certifications are documentation an NCR facilities team can reference for building compliance and insurance purposes when a pump system is specified for a commercial, institutional, or industrial building. Certification documentation is provided alongside the warranty documentation referenced on the quotation, so an NCR buyer receives both compliance paperwork and warranty terms as part of the same purchase record rather than needing to request them separately after installation. This documentation set is what a specifying engineer or facilities manager typically asks for before approving a pump system purchase for a commercial or institutional NCR building.
Lead times, VAT treatment and delivery across Metro Manila
Standard lead time for pump systems already held ex-stock is 21 to 35 days from order confirmation to delivery and installation in NCR. Made-to-order pump systems, including custom VFD duplex control panel configurations, run 45 to 90 days depending on the production schedule. These lead times matter for NCR construction and renovation projects working against a fixed turnover date, since a made-to-order control panel ordered late can delay an entire building's water system commissioning. VAT treatment follows standard Philippine rules: buyers who are VAT-registered pay the standard 12 percent VAT on the purchase, while PEZA and SBMA locators and exporters are eligible for zero-rated VAT on qualifying purchases, subject to the usual zone documentation requirements. Delivery and installation cover NCR directly and extend to the rest of Luzon, Visayas, Mindanao, and PEZA, SBMA or Clark zone facilities, so a buyer with sites both inside and outside NCR can consolidate procurement through one installer. Every RFQ, whether for a single booster pump or a multi-building rollout, receives a response within 1 business day, which lets an NCR facilities or procurement team get a lead time and project schedule figure quickly enough to plan around a project timeline.
Where these pump systems get installed across NCR
TankSmith's pump systems are specified into commercial, industrial, and institutional buildings across NCR, a coverage scope that spans the full range of facility types rather than one narrow vertical. Commercial buildings include hotels and condominiums that need booster pump systems for upper-floor water pressure. Institutional buyers include hospitals and medical facilities where continuous water supply is a life-safety requirement, not just a convenience. Industrial buyers include factories and processing facilities that need transfer or submersible pumps as part of a production water system. Because TankSmith designs the pump and tank side together, the same NCR industrial buyer sourcing a pump system also gets access to matching water storage in FRP, GRP, HDG steel or stainless steel bolted panels, sized from 1,000 L to 500,000 L, specified, supplied and installed under one contract. Coverage is not limited to NCR alone. The same pump systems, warranty documentation, and after-sales support extend to Luzon, Visayas, Mindanao, and PEZA, SBMA or Clark zone facilities, so an NCR-headquartered buyer with provincial branch locations can standardize on one pump and tank installer across all sites instead of sourcing locally at each branch.
What to send us so we can size and quote your NCR pump correctly
To size and quote an NCR pump system correctly, TankSmith needs the building or facility type, whether commercial, institutional, or industrial, the intended pump application such as booster, transfer, submersible, deep-well, or fire protection under an NFPA 20 package, and the flow rate and head requirement if already known from a mechanical engineer's design. If those figures are not yet available, TankSmith can work from the building's floor count, fixture count, or tank capacity to estimate the requirement. Buyers should also indicate whether they need a VFD duplex control panel alongside the pump, since panel sizing depends on the pump's motor rating and whether the installation needs alternating or lead-lag operation between two pumps, and whether a matching water storage tank should be specified and installed under the same contract. VAT registration status, whether standard VAT-registered or PEZA or SBMA zero-rated, should be included so the quotation reflects the correct tax treatment. Delivery and installation address and any site access constraints in NCR, such as loading dock availability or elevator size for upper-floor installations, help TankSmith confirm the lead time realistically rather than quoting the standard 21 to 35 day ex-stock window and discovering a site constraint later. RFQs submitted with this information get a response, including a lead time estimate, within 1 business day.
Frequently Asked Questions
TankSmith documents warranty terms on the quotation before the sale, and because TankSmith's own team installs and commissions the system, after-sales support means contacting the same team that built it rather than filing a claim with an outside party. Warranty duration and coverage scope vary by system configuration, so specific terms are confirmed in writing on the quotation rather than published as one blanket policy across all pump systems. Ask for the warranty terms in writing before ordering. This applies across TankSmith's booster, transfer, submersible, and fire pump systems and the VFD duplex control panels installed alongside them.
TankSmith sizes, supplies, installs and commissions booster pumps for building water pressure, transfer pumps for moving water between tanks or systems, submersible and deep-well pumps, and jockey and fire pumps including NFPA 20 packages, each available as a standalone unit or packaged with a VFD duplex control panel for alternating or lead-lag operation between two pumps. Panels are available in VFD, duplex, simplex, star-delta, SDE or MCC configurations, sized to the pump's motor rating. Send your facility type and application and TankSmith will confirm the correct pump and panel configuration for your NCR site.
Pump systems already held ex-stock are delivered and installed in 21 to 35 days from order confirmation. Made-to-order systems, including custom VFD duplex control panel configurations, run 45 to 90 days depending on the production schedule. Delivery and installation cover NCR directly and extend nationwide across Luzon, Visayas, Mindanao, and PEZA, SBMA or Clark zone facilities. Site access constraints in NCR, such as loading dock availability or elevator size for upper-floor installations, can affect the realistic delivery date, so flag these when requesting a quote. Every RFQ gets a response, including a lead time estimate, within 1 business day of submission.
Standard VAT-registered buyers are charged the standard 12 percent VAT on the pump system purchase. PEZA and SBMA locators and exporters qualify for zero-rated VAT treatment on qualifying purchases, subject to the usual zone documentation requirements, which affects total project cost for buyers operating inside an economic zone. Indicate your VAT registration status when requesting a quote so the quotation reflects the correct tax treatment from the start rather than requiring a revision after the fact.
Equipment installed by TankSmith carries certification appropriate to its category: CE marking on electrical control panels, ASME standards for pressure vessels where applicable, ISO 9001 certification for the manufacturer's quality management system, and TUV SUD testing on components. Water storage tank panels installed alongside the pump system carry WRAS certification, with NSF-compliant liners where the configuration calls for one. Certification documentation is provided alongside warranty documentation as part of the standard quotation and purchase record, not as a separate request, so an NCR buyer has both in hand before installation begins.
TankSmith installs pump systems nationwide across the Philippines, with this page focused on NCR coverage across all of Metro Manila's cities. The same pump systems, warranty documentation, and after-sales support extend to the rest of Luzon, Visayas, Mindanao, and PEZA, SBMA or Clark zone facilities, so a buyer with sites both inside and outside NCR can source and install from one team across all locations rather than sourcing separately at each branch.
Browse more configurations in the water tank systems directory.
Related Pages
- Cebu Industrial Pump Supplier with VFD Duplex Control Panels
- VFD Pump vs VS Pump: Are They the Same Thing in the Philippines?
- Pump Supplier for Cavite Industrial Estate and PEZA Facilities
- 15 HP VFD Duplex Booster Pump System Supplier in the Philippines
- 3HP Submersible Pump for Deep Well Use: Price and Specs in the Philippines
- Big Submersible Water Pump Supplier in Pampanga and Clark
Found this useful? Add TankSmith as a Preferred Source on Google so our tank sizing guides show up first next time you search.