A panel mounted pump is a pump and motor factory-fitted to the same control panel baseplate, whether VFD, star-delta, or SDE, so the starter, protection devices, and pressure controls ship as one tested assembly. TankSmith supplies, installs, and commissions these systems nationwide across NCR, Luzon, Visayas, Mindanao, and PEZA, SBMA, or Clark zone sites, built to an ISO 9001 manufacturer QMS, with the pump and control panel designed alongside the matching water storage tank under one contract, and standard lead times of 21 to 35 days ex-stock or 45 to 90 days made-to-order.
What Is a Panel Mounted Pump
A panel mounted pump is a pump and motor assembly factory-fitted to the same baseplate as its control panel, instead of the pump, starter, and protection devices being sourced separately and wired together on site. The panel can be a VFD (variable frequency drive) panel, a star-delta starter panel, or an SDE (soft start) panel, depending on how the motor needs to start and how closely pressure or flow needs to be controlled. Because the panel ships pre-wired and tested as one assembly, the buyer avoids mismatched components, reduces field wiring time, and gets a single point of accountability if something does not run correctly at commissioning. This matters for procurement teams and contractors who need equipment that arrives ready to connect rather than a parts list that still needs to be engineered into a working system on site. TankSmith supplies, installs, and commissions panel mounted pumps for booster and transfer duty, built around the pump configuration (single unit or duplex) that the building's water demand and redundancy requirement calls for, and designed alongside the matching water storage tank under one contract. Buyers typically ask for a panel mounted configuration when they want a tested assembly with a documented control sequence and a single team responsible for both the pump side and the installation, rather than assembling the starter, pump, and protection devices as separate line items with separate contractors.
Panel Types and Pump Configurations We Supply
TankSmith supplies and installs panel mounted pumps with VFD, star-delta, or SDE control panels, matched to the pump duty the site requires. A VFD panel varies motor speed to hold constant pressure as demand changes, which suits buildings with fluctuating water use such as commercial or institutional sites with uneven occupancy. A star-delta panel starts the motor in two stages to limit inrush current, a straightforward and lower-cost option for pumps that run at a fixed speed. An SDE (soft start) panel ramps the motor up gradually without the stepped transition of star-delta, useful where mechanical shock to piping needs to be minimized. Pump bodies used in these assemblies are vertical multistage centrifugal units in stainless steel (SS304) construction, sized from 0.37 kW to 200 kW depending on the required head and flow. On the pump side, configurations include single-pump booster or transfer systems and duplex systems (two pumps, one active and one standby or alternating), as part of TankSmith's pumping and pressure systems line, which includes VFD duplex control panels, IP54 rated, with pressure feedback and automatic alternation between pumps, as a standard product. Buyers specify the panel type and pump configuration based on motor size, required redundancy, and how tightly pressure needs to be held, and TankSmith's quoting process confirms the correct combination, sized against the paired storage tank, before installation and commissioning begin.
Certifications and Build Standards
Panel mounted pump assemblies installed by TankSmith are built to an ISO 9001 manufacturer QMS, meaning production follows a documented quality management system rather than ad hoc assembly. Units are TUV SUD tested as part of the standard build and certification process before installation. Where the pump configuration includes a pressure vessel component, ASME standards apply to that pressure vessel specifically, not to the pump or panel as a whole. These certifications are standard to the equipment as installed and are not a claim of local manufacturing. Procurement teams working on institutional, hospital, hotel, or PEZA/SBMA-zone projects that require documented certification on file can request the relevant certificates as part of the RFQ process, before the order is placed and before TankSmith's own team begins installation and commissioning. This documentation trail is what allows a panel mounted pump to be specified into a project that requires traceable build standards rather than equipment with no accompanying paperwork.
Where Panel Mounted Pumps Are Used
Panel mounted pumps are used wherever a building or facility needs a pre-wired, tested pump and control assembly installed and commissioned as one system rather than field-engineered components. TankSmith supplies and installs these systems for commercial and industrial buildings, and institutional buyers, across NCR, Luzon, Visayas, and Mindanao, including facilities operating inside PEZA, SBMA, or Clark economic zones. A duplex panel mounted configuration suits sites where water demand varies through the day and where redundancy matters if one pump needs maintenance or fails, since the standby or alternating pump keeps the system running. A single-pump panel mounted unit suits smaller or lower-redundancy applications where a simpler assembly meets the requirement. Because the panel and pump are installed and commissioned as one tested system, often alongside the facility's water storage tank under the same contract, facilities teams specifying equipment for a new build or a pump replacement get a shorter path from delivery to commissioning than coordinating a pump, starter, and protection devices as three separate purchases. Buyers in PEZA, SBMA, or Clark locations should note the zero-VAT treatment available to registered locators and exporters, covered in the next section, which affects the cost of the system for that category of buyer specifically.
Lead Times, VAT Treatment, and How to Request a Quote
Panel mounted pumps from TankSmith are quoted, not sold off a public price list, because panel type, pump configuration, and motor sizing vary by site, and are typically quoted together with the matching water storage tank under one contract. Standard lead times are 21 to 35 days ex-stock for configurations built from components already on hand, or 45 to 90 days made-to-order for configurations that need to be built to a specific motor size, panel type, or duplex arrangement. Standard 12% VAT applies to VAT-registered buyers. Buyers registered as PEZA or SBMA locators, or buyers qualifying as exporters, are eligible for zero-VAT treatment on the purchase, subject to the usual zone documentation requirements, which should be flagged at RFQ stage so the quote reflects the correct tax treatment from the start. TankSmith responds to RFQs within 1 business day. To request a quote, buyers should specify the building or facility type, required pump duty (booster or transfer), whether a single or duplex configuration is needed, and whether PEZA/SBMA or exporter zero-VAT status applies, so the first quote returned already reflects the correct configuration and tax treatment rather than requiring a second round of clarification.
Delivery and After-Sales Coverage Nationwide
TankSmith installs and commissions panel mounted pumps nationwide across the Philippines, covering NCR, Luzon, Visayas, and Mindanao, as well as PEZA, SBMA, and Clark zone sites. Equipment is backed by local warranty and after-sales support directly from TankSmith's own team, which matters for panel mounted assemblies specifically because a fault on either the pump or the panel side needs a single point of contact rather than the buyer coordinating separately with a pump supplier and a panel fabricator. This single-team structure is part of why a panel mounted assembly is specified over separately sourced components in the first place: one tested unit, one installing team, one warranty, and one point of contact if the system needs servicing after commissioning. Facilities and procurement teams working across multiple sites, including institutional buyers and PEZA/SBMA-zone operators, can confirm nationwide installation timing and after-sales coverage for their specific location as part of the RFQ process, alongside the lead time and VAT treatment covered above.
Frequently Asked Questions
A panel mounted pump is a pump and motor factory-fitted to the same baseplate as its control panel (VFD, star-delta, or SDE), so it ships and installs as one tested assembly. Buying a pump and panel separately means the buyer or contractor has to match components and field-wire the connection on site, which adds engineering time and risk of mismatch. TankSmith supplies and installs panel mounted pumps built to an ISO 9001 manufacturer QMS, with the panel and pump tested together before installation, so the buyer receives one unit with one warranty and one installing team, rather than two separately sourced parts.
TankSmith supplies and installs panel mounted pumps with VFD (variable frequency drive), star-delta, or SDE (soft start) control panels. VFD panels vary motor speed to hold constant pressure as demand changes. Star-delta panels start the motor in two stages at a lower cost, suited to fixed-speed duty. SDE panels ramp the motor up without the stepped transition of star-delta. The correct panel type depends on the pump duty, motor size, and how tightly pressure needs to be controlled, which is confirmed during the RFQ process and sized alongside the paired storage tank.
Standard lead time is 21 to 35 days ex-stock for panel mounted pump configurations built from components already on hand, or 45 to 90 days made-to-order for configurations that need to be built to a specific motor size, panel type, or duplex arrangement. TankSmith responds to RFQs within 1 business day, and the quote will specify which lead time applies once the required panel type and pump configuration are confirmed, so buyers can plan installation and commissioning dates against a firm delivery window rather than an estimate.
Standard 12% VAT applies to VAT-registered buyers purchasing a panel mounted pump. Buyers registered as PEZA or SBMA locators, or buyers qualifying as exporters, are eligible for zero-VAT treatment on the purchase, subject to the usual zone documentation requirements. This status should be flagged when requesting a quote so the RFQ response reflects the correct tax treatment from the first quote, rather than needing to be corrected after the fact. TankSmith installs and commissions equipment at PEZA, SBMA, and Clark zone sites as part of its nationwide coverage, alongside NCR, Luzon, Visayas, and Mindanao.
Yes. TankSmith supplies and installs panel mounted pumps as single-unit (simplex) or duplex (two pumps, one active and one standby or alternating) configurations, including VFD duplex control panels, IP54 rated, with pressure feedback and automatic alternation, as a standard product line. The correct configuration depends on the building's water demand variation and the redundancy required if one pump needs maintenance. This is specified at RFQ stage alongside the panel type (VFD, star-delta, or SDE), the pump duty (booster or transfer), and the matching storage tank.
Browse more configurations in the water tank systems directory.
Related Pages
- FRP Bolted Water Tank Systems in the Philippines: Supply, Install, Commission
- Galvanized Panel Water Tank vs FRP: Which Fits Your Philippine Project
- Glass Reinforced Plastic Panel Tanks: Supply, Install and Commission in the Philippines
- GRP Panel Tank Price in the Philippines: What Determines Installed Cost
- GRP Panel Water Tank Systems: Supply, Install and Commission in the Philippines
- GRP/SMC Sectional Modular Panel Tank Supplier and Installer in the Philippines
Found this useful? Add TankSmith as a Preferred Source on Google so our tank sizing guides show up first next time you search.