A panel tank is a modular water storage system built from bolted panels rather than one welded or poured shell. TankSmith supplies and installs panel tanks in FRP, GRP, HDG steel and stainless steel 304/316, sized from 1,000 liters to 500,000 liters per system, matched with a pressure booster pump under one contract, installed nationwide across the Philippines in 5 to 14 days.
What a Panel Tank Is and How It Is Built
A panel tank is a modular water storage tank assembled on site from individual bolted panels, rather than delivered as one welded shell or cast in place like a concrete reservoir. Each panel bolts to the next using structural fasteners and sealing gaskets, building up the tank wall, floor, and, where needed, internal partitions in place. TankSmith supplies and installs panel tanks in FRP (fiberglass reinforced plastic), GRP/SMC (sheet moulded compound), HDG (hot-dip galvanized) steel, and stainless steel 304 or 316, sized from 1,000 liters up to 500,000 liters per system. Because the tank arrives as component panels instead of one large vessel, it can move through tight access points, rooftops, basements, and confined service yards where a single-piece tank cannot fit, then bolt together on site. This modular build also means a panel tank can be resized: panels can be added, or a section replaced, without demolishing the whole structure. TankSmith handles the panel tank the same way it handles the booster pump system that pairs with it: supply, installation, and commissioning under one contract, with one team accountable for both the storage side and the pressure side of the water system.
Panel Tank Materials: FRP, GRP, HDG Steel and Stainless Steel
TankSmith supplies panel tanks in four material families, and the right one depends on the water application and site conditions. FRP (fiberglass reinforced plastic) bolted panels are the most common choice for potable and process water, offering corrosion resistance and a smooth, non-porous interior. GRP and SMC (sheet moulded compound) panels use a related composite construction and are specified where an SMC panel system is preferred over standard FRP layup. HDG (hot-dip galvanized) steel panel tanks suit fire reserve and process water applications where a steel-frame structure is preferred, with the galvanized coating protecting against corrosion. Stainless steel 304 or 316 bolted panels are specified for potable water, food manufacturing, and applications that require the highest corrosion resistance and the easiest surface to clean, with 316 preferred in coastal or chemically aggressive environments. All four materials are available across the same 1,000 liter to 500,000 liter capacity range, and all can be paired, on request, with a matched vertical multistage centrifugal booster pump system (CDL/CDLF series, 0.37 kW to 200 kW, SS304) and an Inovance VFD duplex control panel for pressure control and auto-alternation. TankSmith's warranty covers the FRP panel for 3 years, with a 20 to 25 year design life across the material range.
Panel Tank Sizes: 1,000 to 500,000 Liters
TankSmith panel tank systems range from 1,000 liters, suitable for a small commercial site or a single-unit backup supply, up to 500,000 liters for an industrial reserve or a multi-building high-rise development. Sizing a panel tank starts with actual demand: a commercial laundry is sized against kg per day of linen throughput, a hospital or clinic against redundancy and code-compliant fire reserve, and a hotel or resort against rooftop retrofit capacity and peak-hour booster pump draw. Because the tank is modular, intermediate capacities between 1,000 and 500,000 liters are built by adding panel rows and bays rather than selecting from a fixed set of tank sizes, which lets the footprint match the available roof, ground, or basement space instead of forcing the site to match a standard tank diameter. TankSmith installs panel tanks at this full range of capacities in 5 to 14 days, depending on the capacity ordered and how ready the civil works and foundation are before the panel delivery arrives.
Panel Tank Plus Booster Pump: One Contract, One Team
A panel tank alone only stores water. Getting that water to a rooftop unit, a fire sprinkler head, or a production line at usable pressure requires a booster pump system sized and controlled to match the tank. TankSmith supplies both halves of that system together: the panel tank on the storage side, and a vertical multistage centrifugal booster pump (CDL/CDLF series, 0.37 kW to 200 kW, SS304) with an Inovance VFD duplex control panel (IP54, pressure feedback, auto-alternation) on the pressure side. Both are supplied, installed, and commissioned under one contract, with mechanical and electrical work coordinated by the same team rather than split between a tank supplier and a separate pump contractor. This single-team accountability model, in place since TankSmith's founding in 2024, means one point of contact if the tank, the pump, or the control panel needs adjustment after commissioning, instead of two vendors pointing at each other's scope.
Where TankSmith Installs Panel Tanks Across the Philippines
TankSmith installs panel tanks nationwide, across NCR, Luzon, Visayas, and Mindanao, including PEZA and freeport locations such as SBMA, Clark, Cavite, and Batangas industrial estates. Verticals served include commercial laundries sized against linen throughput, hotels and resorts doing rooftop retrofits with integrated booster pumps, hospitals and clinics that need redundancy and code-compliant fire reserve, food manufacturing sites that require WRAS-compliant potable water, warehouses and manufacturing plants that need fire reserve or process water, and condominiums and high-rises doing rooftop installs through tight-access retrofit conditions. Because the tank is delivered as bolted panels rather than one large vessel, TankSmith can move a panel tank through freight elevators, narrow rooftop access, and confined basement service corridors that a single-piece tank could not reach, a common constraint on condominium and high-rise retrofit sites. Typical installation runs 5 to 14 days from panel delivery to commissioning, depending on the capacity ordered and how ready the site's civil works are.
Certifications and Warranty on TankSmith Panel Tanks
TankSmith panel tanks are available with WRAS-certified panels for potable water up to 65C, NSF-compliant liners, and are built from ISO 9001 certified partner factory production, with panels TUV SUD tested. TankSmith backs its FRP panel tanks with a 3-year panel warranty, and the panel tank systems carry a design life of 20 to 25 years under normal operating conditions. These certifications matter most for potable water, food manufacturing, and hospital or clinic applications, where the water authority, a food safety auditor, or a hospital's infection control team will ask for documentation before signing off on a new tank installation. Buyers evaluating a panel tank for a PEZA or freeport site, or for a food manufacturing plant, should confirm which certification applies to the specific material and panel type being quoted, since not all certifications apply uniformly across FRP, GRP, HDG steel, and stainless steel panel options.
Frequently Asked Questions
What is a panel tank?
A panel tank is a modular water storage tank built from individual bolted panels rather than one welded shell or a poured concrete structure. TankSmith supplies panel tanks in FRP, GRP/SMC, HDG steel, and stainless steel 304 or 316, in capacities from 1,000 liters to 500,000 liters. Because the tank is assembled from panels on site, it can move through tight access points such as rooftops, basements, and narrow service corridors, then bolt together in place. Panel tanks are commonly paired with a pressure booster pump system so that stored water reaches usable pressure at the point of use.
What materials do panel tanks come in?
TankSmith panel tanks are available in four material options: FRP (fiberglass reinforced plastic), GRP/SMC (sheet moulded compound), HDG (hot-dip galvanized) steel, and stainless steel 304 or 316. FRP and GRP/SMC panels suit potable and process water with strong corrosion resistance. HDG steel suits fire reserve and process water applications. Stainless steel 304 or 316 suits potable water, food manufacturing, and applications needing the highest corrosion resistance and easiest cleaning, with 316 preferred in coastal or chemically aggressive sites. All four materials are available across the same 1,000 liter to 500,000 liter capacity range.
What size panel tank do I need?
Panel tank sizing depends on actual water demand rather than a fixed list of standard sizes. TankSmith panel tanks range from 1,000 liters to 500,000 liters, built up by adding panel rows and bays to match the required capacity. A commercial laundry is sized against kg per day of linen throughput, a hospital or clinic against redundancy and code-compliant fire reserve, a hotel or resort against rooftop retrofit capacity and peak booster pump draw, and a warehouse or manufacturing plant against fire reserve or process water needs. Send your daily consumption figure, site access constraints, and application to get a sizing recommendation.
How long does panel tank installation take in the Philippines?
TankSmith installs panel tank systems in 5 to 14 days, from panel delivery to commissioning, for capacities from 20 KL to 500 KL. The exact timeline depends on the capacity ordered and how ready the site's civil works and foundation are before panels arrive. TankSmith installs nationwide, across NCR, Luzon, Visayas, Mindanao, and PEZA or freeport locations such as SBMA, Clark, Cavite, and Batangas, with mechanical and electrical work, including the pressure booster pump and control panel, coordinated by the same team that installs the tank.
Can a panel tank be paired with a booster pump system?
Yes. TankSmith supplies panel tanks together with a matched pressure booster pump system under one contract. The pump side uses vertical multistage centrifugal booster pumps (CDL/CDLF series, 0.37 kW to 200 kW, SS304) controlled by an Inovance VFD duplex control panel (IP54, with pressure feedback and auto-alternation). Supplying both the storage tank and the pump system together means one team is accountable for supply, installation, and commissioning on both the storage side and the pressure side, rather than splitting the work between a tank vendor and a separate pump contractor.
What certifications and warranty apply to TankSmith panel tanks?
TankSmith panel tanks are available with WRAS-certified panels for potable water up to 65C, NSF-compliant liners, ISO 9001 certified partner factory production, and TUV SUD tested panels. TankSmith backs its FRP panel tanks with a 3-year panel warranty, and panel tank systems carry a design life of 20 to 25 years under normal operating conditions. Not every certification applies uniformly across all four panel materials, so confirm which certification applies to the specific material and panel type being quoted for your site, especially for potable water, food manufacturing, or hospital applications.
Browse more configurations in the water tank systems directory.