TankSmith supplies and installs modular water storage tanks, 1,000 to 500,000 liters in FRP, GRP, HDG steel, or stainless steel, sized for poultry farm operations across the Philippines. Each system pairs with CDL/CDLF booster pumps (0.37 kW to 200 kW) and VFD control panels for steady pressure, installed in 5 to 14 days under one contract covering supply, installation, and commissioning.
Why Poultry Operations Need Purpose-Sized Water Storage
Poultry operations run on continuous water demand for drinking lines, cleaning between flocks, and general farm sanitation, and an undersized or poorly matched storage system turns into a bottleneck at the worst possible time. Getting the tank and the pump sized correctly for the site, not just the tank alone, is what keeps a farm's water supply reliable day to day. TankSmith is a Philippines-based turnkey installer for modular water tank systems, covering FRP, GRP, HDG steel, and stainless steel bolted panels from 1,000 liters up to 500,000 liters per system. What sets the offering apart is that TankSmith pairs the tank with a matching pressure booster pump system under the same contract, so the storage side and the pressure side are supplied, installed, and commissioned by one team instead of being split across separate vendors. That single-team accountability model, founded in 2024, is built specifically to avoid the finger-pointing that happens when a tank supplier and a pump contractor blame each other for a pressure problem. For a poultry site, that means one point of contact for sizing, one installation crew on site, and one commissioning sign-off covering both the tank and the pump, whether the site is in NCR, elsewhere in Luzon, the Visayas, or Mindanao.
Tank Materials: FRP, GRP, HDG Steel, and Stainless Steel
TankSmith offers four panel material options depending on site conditions and water use: FRP (fiberglass reinforced plastic) bolted panels, GRP/SMC (sheet moulded compound), HDG (hot-dip galvanized) steel, and stainless steel 304 or 316. All sizes run from 1,000 liters to 500,000 liters per tank system, assembled from modular bolted panels rather than a single monolithic shell, which is what allows tight-access or rooftop-style installs as well as large-footprint farm installs. For potable or process water where certification matters, TankSmith offers WRAS-certified panels rated for potable water up to 65C, along with NSF-compliant liners where a liner is specified. The manufacturing side runs on an ISO 9001 certified quality management system and the panels are TUV SUD tested. Every FRP panel system carries a 3-year warranty, with a design life of 20 to 25 years under normal use. Material selection typically comes down to water chemistry, budget, and whether the tank needs to meet potable-water certification standards, and TankSmith's team sizes and specifies the material as part of the quote rather than defaulting to one option across every site.
Booster Pump and Control Systems for Multi-House Layouts
Storage capacity only solves half the problem if pressure at the point of use is inconsistent. TankSmith's pump line uses vertical multistage centrifugal booster pumps, the CDL/CDLF series, built in SS304 stainless steel and available from 0.37 kW up to 200 kW, so the pump can be matched to anything from a single small storage tank to a large multi-tank installation. Pressure control runs through VFD duplex control panels built on Inovance VFDs, rated IP54, with pressure feedback and auto-alternation between duplex pumps so the system keeps pressure steady and shares wear evenly across the pump set rather than running one pump continuously while the other sits idle. Because TankSmith supplies the tank and the pump system as one turnkey package, mechanical work, electrical work, and commissioning are handled under a single contract and a single site visit, rather than requiring the farm to coordinate a tank installer and a separate pump and controls contractor. That matters most on sites with multiple structures drawing from the same storage and pressure system, where mismatched or uncoordinated pump sizing is the most common cause of pressure complaints after installation.
Installation Timeline and Nationwide Coverage
Typical installation timelines run 5 to 14 days for systems in the 20 KL to 500 KL range, with the exact schedule depending on the tank capacity and how ready the civil works (foundation, plinth, containment) are before the crew arrives. Smaller installs at the low end of that range and sites with civil works already complete tend to land toward the 5-day end; larger multi-tank systems or sites needing civil work coordination land toward 14 days. TankSmith covers installation nationwide across the Philippines, including NCR, the rest of Luzon, the Visayas, and Mindanao, as well as PEZA and freeport industrial estates such as SBMA, Clark, Cavite, and Batangas. For farm sites outside major urban centers, this nationwide reach matters because it means the same turnkey supply-install-commission process applies whether the site is close to Metro Manila or in a more remote provincial location, without needing a separate regional contractor for installation.
Warranty and Long-Term Reliability
Every FRP panel tank system from TankSmith carries a 3-year warranty on the panels, with an expected design life of 20 to 25 years when the system is maintained normally. That warranty and design life figure is backed by the manufacturing standards behind the panels: an ISO 9001 certified quality management system at the partner factory level and TUV SUD testing on the panels themselves. Where potable water certification is required, WRAS-certified panels (rated for potable water up to 65C) and NSF-compliant liners are available as part of the specification. For a farm operation, long-term reliability is less about a single warranty number and more about the tank continuing to hold pressure and seal properly across two decades of continuous use, which is why the panel certification and testing standards matter alongside the warranty term itself. TankSmith's commissioning process, covering both the tank and the paired booster pump system, is the final check that confirms the installed system performs to spec before handoff, rather than leaving performance verification to the farm after the crew has left site.
Frequently Asked Questions
TankSmith's modular bolted panel tanks range from 1,000 liters up to 500,000 liters per system, in FRP, GRP, HDG steel, or stainless steel. Because the panels are modular rather than a single molded shell, sizing can be matched closely to actual farm water demand instead of forcing a jump to the next fixed size. The right capacity and material depend on the number of houses on site, water source, and whether the water needs to meet potable-water certification standards, which TankSmith's team works through as part of the quote.
Both, under one contract. TankSmith supplies CDL/CDLF vertical multistage centrifugal booster pumps (0.37 kW to 200 kW, SS304) paired with VFD duplex control panels built on Inovance VFDs, with pressure feedback and auto-alternation. The tank and pump system are supplied, installed, and commissioned by the same team, so there is a single point of accountability for both the storage side and the pressure side rather than coordinating two separate vendors.
Typical installs run 5 to 14 days for capacities between 20 KL and 500 KL, depending on the tank size and how ready the civil works are before the crew arrives. Sites with foundation and containment work already complete tend toward the shorter end of that range. TankSmith's turnkey process covers supply, installation, and commissioning of both the tank and the paired booster pump system within that same window.
Yes. TankSmith covers installation nationwide across the Philippines, including NCR, the rest of Luzon, the Visayas, and Mindanao, as well as PEZA and freeport industrial estates such as SBMA, Clark, Cavite, and Batangas. The same turnkey supply, installation, and commissioning process applies regardless of region.
Panels are manufactured under an ISO 9001 certified quality management system and are TUV SUD tested. WRAS-certified panels are available for potable water up to 65C, and NSF-compliant liners are available where a liner is specified. These certifications apply to the panel material and construction, and the specific certification needed depends on whether the water stored is potable or process water.
FRP panel systems carry a 3-year warranty, with an expected design life of 20 to 25 years under normal maintenance. That figure is supported by the ISO 9001 quality management system and TUV SUD testing behind the panel manufacturing. Warranty terms for other materials (GRP, HDG steel, stainless steel) are confirmed as part of the quote based on the specific system configuration.
Browse more configurations in the water tank systems directory.
Related Pages
- 50 Cubic Meter (50 KL) Water Tank Supplier and Installer in the Philippines
- Bulk Water Storage Tanks for Water Refilling Stations in the Philippines
- Condominium Water Storage Tank Supplier and Installer in the Philippines
- Factory Water Storage Tank Supply and Installation Across the Philippines
- Food Grade Water Storage Tank Supplier, Philippines: WRAS-Certified Panels
- FRP Water Storage Tank Installer in Cavite: Supply, Install, Commission
Found this useful? Add TankSmith as a Preferred Source on Google so our tank sizing guides show up first next time you search.