A combination simplex/duplex alternating full voltage pump controller rated 2.0 HP, 220V, 1-phase, 60Hz runs one or two pumps on alternating duty without a variable frequency drive. TankSmith sizes, supplies, installs and commissions this panel nationwide in the Philippines as part of its turnkey pump and tank systems, on quote-based pricing, with 21 to 35 day ex-stock lead time or 45 to 90 days made-to-order, and 12% VAT for VAT-registered buyers outside PEZA and SBMA zones (zero-rated for PEZA and SBMA locators).
What a Combination Simplex/Duplex Alternating Full Voltage Pump Controller Does
A combination simplex/duplex alternating full voltage pump controller is a panel that starts and stops one or two pumps directly across the line, without a variable frequency drive. In simplex mode it runs a single pump. In duplex mode it runs two pumps and alternates which pump leads on each start cycle, which spreads wear evenly and keeps a backup pump ready if the lead unit needs service. Full voltage, also called across the line, starting applies motor voltage immediately at start, which is simpler and less expensive than a VFD panel for applications that run at a fixed duty point rather than needing variable speed. TankSmith sizes, supplies, installs and commissions this controller for 2.0 HP, 220V, 1-phase, 60Hz motors, matching the standard single-phase pump sizing used in Philippine commercial and light industrial buildings. It sits within TankSmith's turnkey pump and pressure system scope, alongside booster, transfer, and submersible pump packages and VFD duplex panels for sites that do need speed modulation, all designed together with the matching tank under one contract. Buyers choosing between this controller and a VFD duplex panel should base the decision on whether the application needs pressure or flow modulation. If it runs at one fixed duty point, full voltage alternating control is the simpler and lower-cost option.
Specifications: 2.0 HP, 220V, 1-Phase, 60Hz
This controller is built around a 2.0 HP motor rated for 220V, single-phase, 60Hz supply, the standard voltage and frequency configuration for Philippine commercial buildings. The panel provides alternating duty control for two pumps (duplex) or standalone control for one pump (simplex), switching the lead pump automatically on each start cycle rather than running one pump continuously. Starting is full voltage (across the line), meaning the motor receives full line voltage at start rather than a ramped voltage or frequency profile from a VFD. TankSmith's control panels, including this one, are produced under ISO 9001 manufacturer quality management with TUV SUD testing. The panel is suited to a single, fixed duty point: if the installation calls for 2.0 HP, 220V, 1-phase, 60Hz pumps running at one consistent flow and pressure target with lead-lag redundancy, this specification matches that requirement directly. Buyers with a different voltage, phase, frequency, or horsepower requirement should request a quote with their exact specification, since TankSmith sizes and configures panels to the site, then installs and commissions them as part of the matching pump and tank system, rather than offering only this single rating.
Where This Controller Fits: Philippine Commercial and Industrial Applications
This controller fits Philippine commercial and institutional buildings that need simple duplex pump redundancy at a fixed 2.0 HP, 220V, 1-phase, 60Hz duty point: domestic water booster sets, sump and sewage ejector duplex systems, and smaller transfer pump applications where plumbing code requirements call for a backup pump rather than variable speed control. TankSmith supplies, installs and commissions equipment nationwide, covering NCR, Luzon, Visayas, Mindanao, and PEZA, SBMA, and Clark economic zones, so the same controller specification is available whether the installation is in Metro Manila or a provincial site. Because the panel uses full voltage starting rather than a VFD, it suits buildings where the pump load does not vary enough to justify the added cost of speed control, such as fixed-demand sump pits or booster sets serving a stable occupancy load. For buildings with variable demand, such as high-rise domestic water booster systems that need pressure modulation across occupancy swings, TankSmith's VFD duplex panels, installed and commissioned alongside the matching tank, are the better fit.
Pricing, Lead Time, and VAT Treatment in the Philippines
TankSmith prices this controller on a quote basis and does not publish a fixed price, since final cost depends on panel configuration, enclosure requirements, site-specific accessories, and installation scope when it is supplied as part of a turnkey pump and tank system. RFQs receive a response within 1 business day. Standard lead time is 21 to 35 days for ex-stock configurations or 45 to 90 days for made-to-order panels, so buyers should factor lead time, plus installation and commissioning, into project scheduling before committing to a timeline. 12% VAT applies for VAT-registered buyers outside PEZA and SBMA zones. PEZA and SBMA locators and exporters qualify for zero-VAT treatment on eligible purchases, which should be confirmed at quote stage with the relevant documentation. Buyers planning budget approval or procurement timelines should request a formal quote referencing the 2.0 HP, 220V, 1-phase, 60Hz specification directly, since pricing is not estimated from a published list and will vary by configuration and install scope.
Full Voltage Alternating Control vs VFD Duplex Panels
Full voltage alternating control and VFD duplex control solve the same lead-lag redundancy problem differently. A full voltage alternating panel, like this 2.0 HP, 220V, 1-phase, 60Hz controller, starts each pump directly across the line and alternates which pump leads, with no speed adjustment. It is the simpler and lower-cost panel for a fixed duty point. A VFD duplex panel, also within TankSmith's turnkey pump and control scope, ramps pump speed up and down through a variable frequency drive, which adds soft-start capability and lets the system modulate pressure or flow as demand changes. The tradeoff is cost and complexity against flexibility: full voltage alternating control costs less and has fewer components to maintain, while a VFD duplex panel costs more but handles variable demand and reduces mechanical stress from repeated full-voltage starts. Buyers should specify which demand profile they have, fixed or variable, when requesting a quote so TankSmith can confirm whether a full voltage alternating controller or a VFD duplex panel is the better match for the pump and tank system being installed.
Nationwide Supply, Certifications, and After-Sales Support
TankSmith supplies, installs and commissions this controller nationwide across NCR, Luzon, Visayas, Mindanao, and PEZA, SBMA, and Clark economic zones, with local warranty and after-sales support included regardless of site location. TankSmith's control panels, including this one, are produced under ISO 9001 manufacturer quality management with TUV SUD testing. These certifications cover the panel hardware itself. Buyers with a site-specific requirement for a different certification, such as UL or FM listing, should raise that at RFQ stage since it is not a standard inclusion. RFQs receive a response within 1 business day, and after-sales support covers the panel through its local warranty period as part of the matching tank and pump system TankSmith installs under one contract. For provincial and economic-zone buyers, the same specification, lead time, and VAT treatment described above apply regardless of distance from Metro Manila.
Frequently Asked Questions
A simplex controller operates a single pump. A duplex controller operates two pumps and alternates which pump leads on each start cycle, so wear is shared evenly and a backup pump is available if the lead pump needs service. This combination simplex/duplex alternating full voltage pump controller is sized, supplied, installed and commissioned by TankSmith for 2.0 HP, 220V, 1-phase, 60Hz motors and uses full voltage (across the line) starting rather than a variable frequency drive, which keeps the panel simpler for applications that do not need speed control.
TankSmith does not publish a fixed price because final cost depends on panel configuration, site requirements, and installation scope. Request a quote and expect a response within 1 business day. Standard lead time is 21 to 35 days for ex-stock units or 45 to 90 days for made-to-order configurations. 12% VAT applies for VAT-registered buyers outside PEZA and SBMA zones. PEZA and SBMA locators and exporters qualify for zero-VAT treatment.
Full voltage alternating control starts each pump directly across the line and switches which pump leads on alternating cycles, without adjusting motor speed. A VFD duplex panel, also supplied, installed and commissioned by TankSmith, ramps motor speed up and down through a variable frequency drive, which suits applications that need pressure modulation or soft starting. Choose full voltage alternating control when the application needs simple lead-lag redundancy at a fixed 2.0 HP, 220V, 1-phase, 60Hz duty point without variable speed.
Yes. TankSmith supplies, installs and commissions this controller nationwide, covering NCR, Luzon, Visayas, Mindanao, and PEZA, SBMA, and Clark economic zones. Equipment ships with local warranty and after-sales support regardless of site location. RFQs receive a response within 1 business day so provincial and economic-zone buyers can plan lead time, which runs 21 to 35 days ex-stock or 45 to 90 days made-to-order.
TankSmith's control panels, including this one, are produced under ISO 9001 manufacturer quality management with TUV SUD testing. These certifications apply to the panel hardware. Buyers with site-specific certification requirements such as UL or FM should confirm those separately as part of the RFQ, since they are not standard inclusions.
Browse more configurations in the water tank systems directory.
Related Pages
- 15 HP VFD Duplex Booster Pump System Supplier in the Philippines
- VFD Pump vs VS Pump: Are They the Same Thing in the Philippines?
- 3HP Submersible Pump for Deep Well Use: Price and Specs in the Philippines
- Big Submersible Water Pump Supplier in Pampanga and Clark
- 10,000 Liter Electrical Water Tank System: Pump, Control Panel, and Tank
- Cebu Industrial Pump Supplier with VFD Duplex Control Panels
Found this useful? Add TankSmith as a Preferred Source on Google so our tank sizing guides show up first next time you search.