TankSmith is a Philippines-based turnkey supplier that designs, supplies, and installs modular water tank systems, in FRP, GRP, hot-dip galvanized, and stainless steel, from 1,000 to 500,000 liters. Established in 2024, TankSmith pairs each tank with a matching booster pump system and installs both under one contract, with typical install timelines of 5 to 14 days nationwide across Luzon, Visayas, Mindanao, and PEZA/SBMA/Clark freeport zones.
What TankSmith Supplies as a Water Tank Supplier in the Philippines
As a water tank supplier in the Philippines, TankSmith covers the full scope of a modular water storage project: the tank itself, the pump that pressurizes it, and the controls that run both. The tank line spans FRP and GRP bolted panels, hot-dip galvanized (HDG) steel panels, and stainless steel bolted panels, in capacities from 1,000 liters up to 500,000 liters per system. Buyers select the material and size that fit their site, then TankSmith supplies and installs the complete assembly rather than handing off a bare tank kit. Because TankSmith also supplies the pressure side, the same order can include a vertical multistage centrifugal booster pump system (CDL/CDLF series, 0.37 kW to 200 kW, stainless steel 304 wetted parts) and a duplex VFD control panel built on Inovance drives, rated IP54, with pressure feedback and automatic pump alternation. That means one supplier is accountable for both the water sitting in the tank and the pressure that moves it through the building, instead of a tank vendor and a pump vendor pointing at each other when something underperforms. This tank-plus-pump scope, sold and installed under a single contract, is what separates TankSmith from suppliers that quote tanks alone.
Materials and Certifications
TankSmith offers four panel materials: FRP (fiberglass reinforced plastic), GRP/SMC (sheet moulded compound), hot-dip galvanized steel, and stainless steel in 304 or 316 grade. Material choice depends on the water use, exposure, and budget: FRP and GRP panels suit potable and process water with strong corrosion resistance, HDG steel panels suit fire reserve and non-potable applications where cost matters more than corrosion life, and stainless steel panels suit food-grade or high-purity requirements. Panels are available in WRAS-certified configurations for potable water up to 65C, with NSF-compliant liners where a food-contact certification is required. The panels are produced under an ISO 9001 certified partner factory's quality management system and are TUV SUD tested. TankSmith backs every FRP panel with a 3-year warranty, and the systems carry a 20 to 25 year design life when installed and maintained per specification. For a Philippine buyer comparing local suppliers, these are the certification and warranty numbers to ask for in writing before signing a purchase order, not just a verbal claim of quality.
Turnkey Tank and Pump Systems Under One Contract
Most water tank purchases in the Philippines involve two separate scopes: the tank and the pressure booster system that distributes the stored water. TankSmith sells and installs both under one contract. The mechanical work (tank erection, pump mounting, piping tie-ins), the electrical work (VFD panel wiring, pressure sensor integration), and commissioning (pump alternation testing, pressure setpoint verification) are handled by the same team rather than split between a tank supplier and a separate mechanical contractor. The pump side uses CDL/CDLF series vertical multistage centrifugal pumps rated from 0.37 kW to 200 kW, built in stainless steel 304, matched to the tank's static head and the building's demand curve rather than sold as a generic add-on. The control side uses Inovance VFD duplex panels, IP54-rated for site conditions, with pressure feedback and automatic alternation between duty and standby pumps so the booster system does not depend on one pump running continuously. For facilities that have previously dealt with a tank that leaks or a pump that short-cycles because two different vendors installed each half of the system, sourcing both from one supplier removes that finger-pointing at handover.
Industries We Serve Across the Philippines
TankSmith sizes and installs water tank and pump systems for industries with distinct water demand profiles. Commercial laundry operations are sized against kg-per-day linen throughput rather than a flat capacity guess. Hotels and resorts typically need a rooftop retrofit with booster pump integration to maintain pressure at upper floors. Hospitals and clinics require built-in redundancy and a code-compliant fire water reserve alongside potable supply. Food manufacturing sites need WRAS-compliant potable water handling given the direct food contact risk. Warehouses and manufacturing plants use tanks for fire reserve and process water rather than drinking water. Condominiums and high-rises often need a rooftop installation engineered around tight access, since panels have to go up in sections rather than as one prefabricated unit. Facilities inside SBMA, Clark, Cavite, and Batangas industrial estates fall under PEZA or freeport requirements that TankSmith designs around rather than treating as a standard installation. Each vertical changes the sizing math and the installation sequence, which is why TankSmith scopes capacity against actual throughput or occupancy numbers for the site rather than issuing a one-size capacity recommendation across industries.
Installation Timelines and Nationwide Coverage
TankSmith installs modular tank systems in 5 to 14 days for capacities between 20 KL and 500 KL, with the exact timeline depending on tank capacity and how ready the civil works (foundation, platform, containment) are before the crew arrives. Because the panels are modular and bolted rather than welded on site or poured in place, install time scales with panel count and access conditions rather than requiring the multi-week schedule a cast concrete reservoir needs. Coverage runs nationwide: NCR, the rest of Luzon, Visayas, and Mindanao, including sites inside PEZA and freeport zones such as SBMA and Clark. For a buyer comparing a Philippine water tank supplier, the combination of a firm capacity-to-timeline figure and stated coverage outside Metro Manila matters more than a generic nationwide delivery claim, since installation logistics (crane access, panel transport, crew mobilization) change materially between a Metro Manila rooftop and a freeport zone site several hours away.
Why Buyers Choose TankSmith as Their Philippine Supplier
Buyers sourcing a water tank supplier in the Philippines are usually comparing three things: whether the supplier can be held to a single point of accountability, whether the certifications on offer are verifiable, and whether the numbers quoted (capacity, timeline, warranty) are specific enough to hold the supplier to at handover. TankSmith answers each of the three the same way every time: one contract covers tank and pump, panels carry WRAS certification, NSF-compliant liner options, ISO 9001 partner-factory manufacturing, and TUV SUD testing, and the quoted 3-year FRP warranty with a 20 to 25 year design life is stated up front rather than buried in a contract appendix. The alternative many buyers have already dealt with is a supplier that sells the tank, a separate contractor that installs the pump, and a service call that goes unanswered when pressure drops months later because neither party owns the full system. TankSmith's scope, tank design and supply through pump integration and commissioning, is built to remove that gap for buyers who need one supplier to call when something in the water system needs attention.
Frequently Asked Questions
Is TankSmith a manufacturer or a supplier of water tanks in the Philippines?
TankSmith is a supplier and installer, not a manufacturer. Tank panels are produced by an ISO 9001 certified partner factory and TUV SUD tested, then TankSmith handles specification, delivery to site, installation, and commissioning of the complete tank and pump system. This is the same model used by most water tank suppliers in the Philippines: panel production happens at a certified factory, while the local supplier owns sizing, site work, and after-installation accountability. If a supplier claims to manufacture panels locally, ask to see the factory and the ISO certificate directly, since that claim is uncommon in this market.
What tank capacities does TankSmith supply?
TankSmith supplies modular water tank systems from 1,000 liters up to 500,000 liters per system, built from FRP, GRP, hot-dip galvanized steel, or stainless steel bolted panels. Because the panels are modular, capacity is set by how many panels are bolted together rather than by a fixed mold size, so intermediate capacities between the 1,000 liter and 500,000 liter range are available. The right capacity depends on daily demand, such as linen throughput for laundries, occupancy for hotels and condominiums, or code-required fire reserve for hospitals and warehouses, rather than a flat number, so TankSmith sizes each quote against the site's actual usage.
Does TankSmith supply pumps as well as tanks?
Yes. TankSmith supplies vertical multistage centrifugal booster pumps (CDL/CDLF series, 0.37 kW to 200 kW, stainless steel 304) matched to each tank system, controlled by duplex VFD panels built on Inovance drives, IP54-rated, with pressure feedback and automatic alternation between duty and standby pumps. The tank and pump are sold and installed under one contract, with the same team handling mechanical installation, electrical wiring, and commissioning. Buyers who only need a bare tank without a pump can still order one, but most commercial and industrial sites order both together so pressure and storage are engineered as one system rather than two.
What areas of the Philippines does TankSmith cover?
TankSmith installs nationwide, covering NCR, the rest of Luzon, Visayas, and Mindanao, including sites inside PEZA and freeport zones such as SBMA, Clark, Cavite, and Batangas. Coverage is not limited to Metro Manila: industrial estate sites and provincial installations are quoted with the same tank and pump scope as a Metro Manila project, with installation logistics such as crew mobilization, panel transport, and crane access adjusted for site distance rather than treated as a separate service tier.
How long does a TankSmith water tank installation take?
Installation typically takes 5 to 14 days for tank capacities between 20 KL and 500 KL, depending on the capacity ordered and how ready the site's civil works (foundation, platform, containment) are when the installation crew arrives. Smaller capacities and sites with completed civil works land toward the 5-day end; larger capacities or sites needing civil work coordination land toward the 14-day end. Because panels are modular and bolted rather than poured or welded on site, install time scales predictably with panel count rather than requiring a multi-week schedule.
What warranty and lifespan does TankSmith offer on its tanks?
TankSmith backs FRP panels with a 3-year warranty, and the tank systems carry a 20 to 25 year design life when installed and maintained per specification. Panels are available with WRAS certification for potable water up to 65C and NSF-compliant liners where food-contact certification is required, produced under an ISO 9001 certified partner factory's quality system and TUV SUD tested. Ask any Philippine water tank supplier for these figures (warranty years, design life range, and the specific certifications, not just certified) in writing before ordering, since vague certification claims are common in this market.
Browse more configurations in the water tank systems directory.
Found this useful? Add TankSmith as a Preferred Source on Google so our tank sizing guides show up first next time you search.