TankSmith supplies 100,000-liter (100 m³) FRP modular bolted water tanks engineered for dedicated fire reserve systems in Makati. Our panels meet WRAS, NSF, ISO 9001, and TUV SUD standards, fit through 800 mm doorways, and commission in 5 to 8 days. We deliver from our Antipolo, Rizal warehouse with 1-day lead time to Makati sites. Pricing is quote on request based on site access and booster pump requirements.
Specifications
| Specification | Detail |
|---|---|
| Capacity | 100,000 liters (100 m³) |
| Configuration | FRP modular bolted panels, 1 m × 1 m or 0.5 m × 1 m |
| Panel access | 800 mm doorways |
| Commission time | 5 to 8 days |
| Design life | 20 to 25 years |
| Warranty | 3-year FRP panel warranty |
| Certifications | WRAS, NSF, ISO 9001, TUV SUD |
| BFP fire reserve compatible | Yes |
| Delivery to Makati | 1 day lead time from Antipolo warehouse |
| Fire reserve compartment | Dedicated inlet and outlet configuration to prevent domestic cross-use |
| Hydrostatic test | Factory-tested panels, on-site pressure test after assembly |
| Booster pump compatibility | Compatible with jockey, electric, and diesel fire pumps |
Application Notes
- BFP National Building Code requires minimum 60-minute fire reserve for sprinkler and standpipe systems in commercial buildings.
- 100 m³ supports approximately 50 sprinkler heads at 2 gpm per head for 60 minutes with 15% safety margin.
- Modular FRP panels allow rooftop or basement installation without crane access in high-density Makati sites.
- Dedicated fire reserve compartment prevents accidental domestic water draw, maintaining full BFP-required volume at all times.
- Non-corrosive FRP construction eliminates rust sediment that clogs fire pump strainers and sprinkler nozzles.
- Panels disassemble for future relocation if building use changes or fire code updates require capacity adjustment.
- TankSmith includes inlet baffle, overflow, drain, and fire pump suction outlet in standard fire reserve configuration.
Delivery and Installation
We deliver panels and gaskets from Antipolo to Makati in 1 day. Installation requires 5 to 8 days depending on rooftop or basement access. Our crew wears PPE and coordinates with building admin for material hoisting. BFP inspections typically occur after hydrostatic test and before occupancy permit issuance.
Frequently Asked Questions
How long does a 100 m³ tank take to install in Makati?
Commission time is 5 to 8 days from panel delivery. This includes base preparation, panel bolting, gasket sealing, hydrostatic test, and booster pump connection. Rooftop installations may add 1 to 2 days if hoisting requires weekend or night shifts to avoid tenant disruption.
Is the tank BFP-compliant for fire reserve?
Yes. TankSmith FRP tanks meet potable water standards (WRAS, NSF) required for fire reserve systems. We configure dedicated inlet, outlet, and overflow per BFP guidelines to prevent domestic cross-connection. The tank itself does not carry a BFP certificate, but the materials and design comply with National Building Code fire reserve requirements.
Can panels fit through Makati building doorways?
All FRP panels fit through standard 800 mm doorways and service elevators. We hand-carry panels to rooftop or basement mechanical rooms without external crane rental, reducing installation cost and avoiding street closure permits in Makati CBD.
What warranty comes with the tank?
TankSmith provides a 3-year warranty on FRP panels covering delamination, crack, and leak defects under normal fire reserve use. Warranty excludes damage from improper installation, overpressure, or chemical contamination. Design life is 20 to 25 years with annual inspection.
Do you deliver to Makati?
Yes. We deliver from our Antipolo, Rizal warehouse to any Makati address with 1-day lead time. Delivery includes panels, stainless steel bolts, EPDM gaskets, and installation manual. Booster pumps and electrical work are quoted separately.
Can we get a service invoice with BIR receipt?
Yes. TankSmith and sister brand JOHOB Hardware Trading issue BIR-registered invoices and official receipts for all supply and installation contracts. We provide complete documentation for building permit, BFP inspection, and corporate accounting requirements.
What is the cost of a 100 m³ fire reserve tank in Makati?
Pricing is quote on request. Cost depends on site access, base type (concrete slab or steel frame), booster pump specification, and electrical integration. Contact TankSmith with your building address and fire pump schedule for a detailed quotation within 24 hours.
Can the tank be installed on a rooftop in Makati?
Yes. A filled 100 m³ FRP tank weighs approximately 102,000 kg (100,000 L water plus 2,000 kg panel and frame weight). Your structural engineer must confirm rooftop slab capacity. TankSmith provides tank weight distribution drawings for structural review before delivery.
Get a 100 m³ fire reserve tank quote in 24 hours
Send your Makati building address, fire pump specs, and rooftop or basement preference to TankSmith. We will reply with panel layout, delivery schedule, and pricing within one business day. All quotes include delivery from our Antipolo warehouse and on-site installation coordination.
Request a QuoteBrowse more configurations in the water tank systems directory.