TankSmithTankSmith
Supplier · FRP Modular Tanks

Reinforced Plastic (FRP) Storage Tank Supplier in the Philippines

TankSmith is a Philippines-based supplier of FRP (fiberglass reinforced plastic) storage tanks, built from bolted modular panels in sizes from 1,000 to 500,000 liters. Panels are WRAS-certified for potable water up to 65C and carry a 3-year warranty with a 20 to 25-year design life. TankSmith supplies, installs, and commissions each system nationwide, from NCR to PEZA and SBMA freeport sites.

What Is an FRP Reinforced Plastic Storage Tank

An FRP (fiberglass reinforced plastic) storage tank is built from modular bolted panels rather than cast or welded as one piece. TankSmith supplies FRP alongside GRP/SMC (sheet moulded compound), hot-dip galvanized (HDG) steel, and stainless steel 304/316 panel systems, so the material can be matched to the water type, site access, and budget. FRP panels come from an ISO 9001 certified partner factory and are assembled on site, which keeps transport and crane requirements lower than a single-piece tank of the same capacity. Each panel is bolted with a gasketed seal, and sections can be added or removed to adjust capacity before final commissioning.

TankSmith handles the full scope under one contract: supply of the panel system, structural assembly, and commissioning of the finished tank, so there is a single point of accountability for both the storage shell and anything connected to it, including a booster pump system if the site needs one. This bolted panel approach is the same construction method used across TankSmith's full tank range from 1,000 to 500,000 liters, which means the same installation crew and the same warranty terms apply regardless of whether the project is a small rooftop retrofit or a large industrial reserve tank.

Certifications and Water Safety Standards

TankSmith's FRP panels are WRAS-certified for potable water service up to 65C, which matters for any tank that will hold water people drink, cook with, or use in food production. Liners used in the system are NSF-compliant, and the manufacturing partner holds ISO 9001 certification for its quality management system. Panels are also TUV SUD tested. Every TankSmith FRP tank carries a 3-year warranty on the panel system and is built for a 20 to 25-year design life, which is the number to request in writing from any supplier before signing a contract, since warranty terms vary widely between tank suppliers in the Philippines.

Buyers sourcing a tank for a hospital, food manufacturing line, or hotel potable supply should confirm WRAS and NSF documentation directly from the supplier rather than relying on verbal assurance, since these are the certifications that determine whether the tank is actually suitable for drinking water storage rather than process or fire-reserve water only. TankSmith can provide this documentation as part of the supply contract.

Capacity Range and Specifications

TankSmith's FRP modular panel tanks are available from 1,000 liters up to 500,000 liters per system, with the bolted panel construction allowing intermediate capacities to be matched to the exact footprint and demand of a site rather than forcing a buyer into a fixed catalog size. For sites that need pressure as well as storage, TankSmith pairs the tank with its own booster pump line: vertical multistage centrifugal CDL/CDLF series pumps ranging from 0.37 kW to 200 kW in SS304 construction, controlled by Inovance VFD duplex control panels rated IP54 with pressure feedback and automatic pump alternation.

Because the tank and the pump system are supplied, installed, and commissioned by the same team under one contract, there is no handoff gap between the civil/mechanical side and the electrical/control side, which is the point of failure on projects where a tank supplier and a pump contractor are hired separately and each blames the other when pressure or flow does not meet spec after handover.

Installation Timeline and Nationwide Coverage

Typical installation for TankSmith's FRP tank systems runs 5 to 14 days for installs in the 20 KL to 500 KL range, with the exact duration depending on tank capacity and how ready the civil works (foundation, platform, access) are before the crew arrives. TankSmith installs nationwide across the Philippines, covering NCR, the rest of Luzon, Visayas, and Mindanao, including PEZA, SBMA, and Clark freeport and industrial estate sites, which often carry their own access and documentation requirements for contractors entering the zone.

Buyers planning a project inside a freeport or industrial estate should flag that early, since site clearance and gate-pass processing can add lead time outside TankSmith's control. For straightforward sites with the pad already poured and access confirmed, the 5-day end of the range is realistic; retrofit sites with tight rooftop access or an existing tank to remove first should plan for the upper end of the 14-day window. Send full project details through the TankSmith quotation form.

Industries That Use FRP Storage Tanks

TankSmith's FRP tank systems are sized and specified differently depending on the vertical. Commercial laundries size tanks against kg/day linen throughput rather than a flat capacity guess. Hotels and resorts most often use FRP tanks for rooftop retrofits paired with a booster pump to restore pressure lost to gravity-fed systems. Hospitals and clinics need redundancy and a code-compliant fire reserve volume built into the sizing, not just a single tank with no backup. Food manufacturing sites need the WRAS-compliant potable configuration described above rather than a standard process-water tank.

Warehouses and manufacturing plants typically split capacity between fire reserve and process water. Condominiums and high-rises are usually rooftop retrofit projects with tight crane and access constraints, which is where the modular bolted panel construction matters most since panels can be carried up in sections a single-piece tank cannot. Industrial estate sites in SBMA, Clark, Cavite, and Batangas add PEZA/freeport site-access requirements on top of the standard install scope.

Why Choose TankSmith for an FRP Tank Project

TankSmith is a Philippines-based turnkey installer, meaning one team is accountable for both the storage side (the FRP tank itself) and the pressure side (the booster pump system), under a single contract covering supply, installation, and commissioning. That matters because a tank and a pump sourced from two separate vendors create a gap where neither side is contractually responsible for whether the finished system actually delivers the pressure and flow the site needs.

TankSmith's FRP panels carry WRAS certification for potable water up to 65C, a 3-year warranty, and a 20 to 25-year design life, and the company installs nationwide from a 1,000-liter rooftop unit up to a 500,000-liter industrial reserve tank. For a buyer comparing quotes, the questions worth asking any FRP tank supplier are: who carries the warranty, is the pump system included in the same contract, and can the certification documentation (WRAS, NSF, ISO 9001) be provided before the contract is signed, not after. Buyers weighing material tradeoffs can also review TankSmith's material comparison guides for a side-by-side breakdown against HDG steel and stainless steel.

Frequently Asked Questions

An FRP (fiberglass reinforced plastic) storage tank is built from bolted modular panels made of fiberglass reinforced plastic, assembled on site rather than delivered as one piece. TankSmith's FRP panels come from an ISO 9001 certified partner factory, are WRAS-certified for potable water up to 65C, and use NSF-compliant liners. TankSmith also offers GRP/SMC, hot-dip galvanized steel, and stainless steel 304/316 panel systems for sites that need a different material for their water type or application.

TankSmith supplies FRP modular panel tank systems from 1,000 liters up to 500,000 liters per system. Because the panels are bolted rather than cast as one piece, intermediate capacities between these figures can be configured to match a specific site's footprint and demand, rather than being limited to a small set of fixed catalog sizes.

Yes. TankSmith's FRP panels are WRAS-certified for potable water service up to 65C and use NSF-compliant liners, which are the relevant certifications for a tank intended to hold drinking water. The manufacturing partner also holds ISO 9001 certification and the panels are TUV SUD tested. Buyers should request this certification documentation directly as part of the supply contract before confirming a food-grade or potable water project.

Typical installation runs 5 to 14 days for systems in the 20 KL to 500 KL range, depending on the tank's capacity and how ready the site's civil works (foundation, platform, access) are before the installation crew arrives. Sites with the pad already poured and clear access tend toward the shorter end; rooftop retrofits with tight access or an existing tank to remove first tend toward the longer end.

Yes. TankSmith supplies, installs, and commissions FRP tank systems together with matching booster pump systems (vertical multistage centrifugal CDL/CDLF series pumps, 0.37 kW to 200 kW, SS304) and Inovance VFD duplex control panels, under one contract. This means the same team is accountable for both the storage tank and the pressure side of the system, rather than splitting the project between a tank vendor and a separate pump contractor.

Found this useful? Add TankSmith as a Preferred Source on Google so our tank sizing guides show up first next time you search.

Request a Quote

Ready to specify your system?

Send your tank capacity, application, and location. We reply within one business day with clarifying questions and a quotation timeline.

Project detailsNeeded for a faster, more accurate quote
What will the water be used for?