TankSmith is a Philippines-based turnkey supplier and installer of GRP, FRP, HDG steel and stainless steel modular bolted water tanks, sized from 1,000 to 500,000 liters. Founded in 2024, TankSmith supplies and installs matching pressure booster pump systems under one contract, with installation completed in 5 to 14 days nationwide across NCR, Luzon, Visayas, Mindanao and PEZA/SBMA/Clark freeport zones.
What a GRP Tanks Supplier in the Philippines Should Actually Cover
A GRP tanks supplier in the Philippines should cover more than delivering panels to a jobsite. TankSmith operates as a single-team turnkey installer: the same team that specifies the panel material also installs the pump side and commissions the finished system, so there is one point of accountability for both storage and pressure delivery under one contract. This matters in the Philippines because most rooftop retrofits, industrial estate installs and hospital or hotel upgrades involve tight-access sites where poor coordination between a tank supplier and a separate pump contractor causes delays and finger-pointing when pressure targets are missed. TankSmith supplies and installs FRP, GRP, HDG steel and stainless steel modular bolted panels sized from 1,000 to 500,000 liters, and pairs each tank with a matching vertical multistage centrifugal booster pump system and duplex VFD control panel so the storage and pressure sides are engineered together from the start rather than reconciled on site. Typical installs run 5 to 14 days depending on capacity and how ready the civil works are when the crew arrives. TankSmith serves NCR, Luzon, Visayas and Mindanao, including PEZA and freeport zones such as SBMA, Clark, Cavite and Batangas, where customs and site-access rules add coordination steps that a single-contract team is positioned to manage directly.
Materials: GRP, FRP, HDG Steel and Stainless Steel Panels
TankSmith offers four modular bolted panel materials so the material fits the water chemistry and budget rather than the other way around. FRP (fiberglass reinforced plastic) bolted panels and GRP / SMC (sheet moulded compound) panels are the lightest options and the most common choice for potable water, food manufacturing and general commercial storage because they do not corrode and hold up well against most water chemistries. HDG (hot-dip galvanized) steel panels are typically selected where a lower upfront cost matters more than long-term corrosion exposure, commonly for process or fire-reserve water rather than potable supply. Stainless steel 304 and 316 panels are specified where corrosion resistance and a food-grade finish are required, such as food manufacturing sites that need WRAS-certified panels rated for potable water up to 65C. Certifications available across the panel range include WRAS-certified panels for potable water, NSF-compliant liners, ISO 9001 manufacturer quality management systems and TUV SUD testing, so the certification a project needs can be matched to the material and liner selected rather than assumed. Every panel installation carries a 3-year FRP panel warranty with a 20 to 25 year design life, so the material decision is also a long-term maintenance decision, not just a purchase-price decision.
Capacity Range and the Industries TankSmith Sizes For
TankSmith sizes modular tank systems from 1,000 liters up to 500,000 liters per system, which covers everything from a small commercial rooftop tank to a full industrial reserve. Commercial laundries are sized against kg/day linen throughput rather than a flat square-footage estimate, since wash cycle volume drives actual draw more than floor area does. Hotels and resorts typically need a rooftop retrofit paired with booster pump integration, since older buildings were rarely plumbed for current pressure targets. Hospitals and clinics are sized with redundancy and a code-compliant fire reserve in mind, given that downtime on either the potable or fire side is not an acceptable outcome. Food manufacturing sites need WRAS-compliant potable water capacity, which narrows the material choice toward FRP, GRP or stainless steel panels with WRAS-certified liners. Warehouses and manufacturing plants are sized for fire reserve and process water together, often as two separate tanks on one site. Condominiums and high-rises are a tight-access retrofit category on their own, usually requiring rooftop delivery and assembly rather than ground-level installation. TankSmith also installs across SBMA, Clark, Cavite and Batangas industrial estates, where PEZA and freeport site rules add an extra layer of access and customs coordination that a nationwide-capable installer needs to already know how to navigate.
Tank Plus Booster Pump Plus VFD Controls Under One Contract
The pressure side of a water system is where most tank-only suppliers stop, and where TankSmith's scope continues. TankSmith supplies vertical multistage centrifugal booster pumps (CDL/CDLF series) ranging from 0.37 kW to 200 kW in SS304 construction, sized to match the tank and the building's actual pressure targets rather than sold as a generic add-on. Each pump system pairs with a duplex VFD control panel built on Inovance VFDs, rated IP54, with pressure feedback and auto-alternation between duplex pumps so the system maintains pressure automatically and shares wear evenly across both pumps instead of running one pump continuously. Because TankSmith specs, supplies and installs the tank, the pump and the control panel as one turnkey system, mechanical work, electrical work and commissioning happen under a single contract with a single point of accountability. This removes the common failure mode where a tank supplier and a separate pump contractor each blame the other's scope when pressure at the tap does not match what was promised. For facilities managers and procurement teams, that single-contract structure means one commissioning date, one warranty conversation and one team to call if pressure drops months after installation, rather than two vendors to coordinate between.
Installation Timeline and Nationwide Philippine Coverage
Installation timelines run 5 to 14 days for systems between 20 KL and 500 KL, with the exact schedule set by tank capacity and how ready the site's civil works are before the crew arrives. Sites with a completed foundation, level base and clear rooftop or ground access move toward the shorter end of that range, while sites needing civil work coordinated alongside the tank install run longer. TankSmith installs nationwide across the Philippines, covering NCR, Luzon, Visayas and Mindanao, plus PEZA and freeport locations such as SBMA, Clark, Cavite and Batangas industrial estates. Freeport and PEZA sites carry their own access and documentation requirements on top of the standard install sequence, which is one more reason the same team handling supply should also be the team handling install and commissioning: fewer handoffs between parties who are each responsible for only part of the paperwork. Buyers evaluating a GRP tanks supplier for a Philippine project should ask for a capacity-specific timeline rather than a generic quote, since a 20 KL rooftop retrofit and a 500 KL industrial reserve are not on the same schedule even though both fall inside TankSmith's stated 5 to 14 day range.
Warranty, Design Life and Certifications
TankSmith backs every FRP panel installation with a 3-year warranty and a 20 to 25 year design life, which is the figure to compare against any competing quote rather than a headline warranty number alone, since design life reflects how long the tank is expected to perform, not just how long a claim can be filed. On certifications, TankSmith works with WRAS-certified panels rated for potable water up to 65C, NSF-compliant liners for potable applications, ISO 9001 manufacturer quality management systems, and TUV SUD tested materials. Which certification matters depends on the application: a food manufacturing site or a hospital potable supply should confirm WRAS and NSF coverage specifically, while a general industrial or fire-reserve tank may only need ISO 9001 traceability on the panel material. Buyers comparing suppliers should ask for the certification documents by name (WRAS certificate, NSF compliance statement, ISO 9001 certificate, TUV SUD test report) rather than accepting a general claim of certified materials, since the specific certification determines whether the tank is rated for the water contact application the project actually needs.
Frequently Asked Questions
What is the difference between a GRP tank and an FRP tank?
GRP (glass-reinforced plastic) and FRP (fiberglass reinforced plastic) both describe fiberglass panel construction, and TankSmith offers both as separate line items: FRP bolted panels and GRP / SMC (sheet moulded compound) bolted panels. Which one fits a given project depends on the panel spec sheet and the water chemistry and structural requirements of the site, reviewed project by project. Both are part of TankSmith's modular bolted panel range covering 1,000 to 500,000 liters, alongside HDG steel and stainless steel 304/316 panels, and both can be specified with WRAS-certified panels and NSF-compliant liners where potable water compliance is required.
What size range does TankSmith supply?
TankSmith supplies and installs modular bolted tank systems from 1,000 liters up to 500,000 liters per system, across FRP, GRP, HDG steel and stainless steel 304/316 panels. Sizing is done per application: commercial laundries are sized against kg/day linen throughput, hospitals and clinics are sized with redundancy and a code-compliant fire reserve, and condominiums or high-rises are treated as tight-access rooftop retrofits. Whatever the capacity, the tank is paired with a matching booster pump system so storage and pressure are engineered together rather than sized separately.
Does TankSmith install the pressure booster pump along with the tank?
Yes. TankSmith supplies vertical multistage centrifugal booster pumps (CDL/CDLF series, 0.37 kW to 200 kW, SS304) alongside every tank system, paired with a duplex VFD control panel built on Inovance VFDs, rated IP54, with pressure feedback and auto-alternation between pumps. The tank, pump and control panel are supplied, installed and commissioned under one contract, so there is a single point of accountability for both the storage side and the pressure side rather than a tank vendor and a separate pump contractor each handling their own scope.
How long does installation take?
Installation typically runs 5 to 14 days for systems between 20 KL and 500 KL, depending on tank capacity and how ready the site's civil works are when the crew arrives. Sites with a completed foundation and clear access move toward the shorter end of that range. TankSmith installs nationwide across NCR, Luzon, Visayas, Mindanao, and PEZA/freeport locations such as SBMA, Clark, Cavite and Batangas, so exact scheduling also depends on site access and any freeport documentation requirements specific to the location.
What certifications do TankSmith's tank panels carry?
TankSmith works with WRAS-certified panels rated for potable water up to 65C, NSF-compliant liners for potable applications, ISO 9001 manufacturer quality management systems, and TUV SUD tested materials. Every FRP panel installation carries a 3-year warranty with a 20 to 25 year design life. Potable water and food manufacturing projects should confirm WRAS and NSF coverage specifically, while general industrial or fire-reserve tanks may only need ISO 9001 traceability.
Does TankSmith deliver to PEZA and freeport zones like Clark, Cavite, Batangas and Subic?
Yes. TankSmith covers NCR, Luzon, Visayas and Mindanao nationwide, including PEZA and freeport locations such as SBMA (Subic), Clark, Cavite and Batangas industrial estates. These sites typically carry their own access and documentation requirements on top of the standard 5 to 14 day install sequence, which TankSmith coordinates as part of the same single-contract supply, install and commissioning scope used on every project, rather than treating freeport delivery as a separate arrangement.
Browse more configurations in the water tank systems directory.