TankSmith supplies, installs, and commissions FRP, GRP, HDG steel, and stainless steel modular tank systems nationwide across the Philippines, from 1,000 to 500,000 liters per system. Panels carry WRAS certification for potable water up to 65 degrees C, NSF-compliant liners, and ISO 9001 partner-factory manufacturing. Most 20 KL to 500 KL installations complete in 5 to 14 days, backed by a 3-year panel warranty and 20 to 25 year design life.
What TankSmith Supplies as an FRP Tank Supplier in the Philippines
TankSmith is a Philippines-based turnkey supplier of modular water tank systems, covering FRP (fiberglass reinforced plastic), GRP, hot-dip galvanized (HDG) steel, and stainless steel bolted panels. Founded in 2024, TankSmith operates on a single-team accountability model: the same team handles supply, installation, and commissioning under one contract, rather than splitting the tank and the pump between separate vendors. Alongside the tank itself, TankSmith supplies matching pressure booster pump systems: vertical multistage centrifugal booster pumps (CDL/CDLF series, 0.37 kW to 200 kW, SS304 construction) paired with VFD duplex control panels (Inovance VFDs, IP54-rated, with pressure feedback and auto-alternation). Buyers get one point of contact for both the storage side and the pressure side of a water system, with mechanical and electrical work commissioned together rather than coordinated across two separate contractors and two separate warranties. The core product line spans four categories: TANK (FRP, GRP, HDG steel, or stainless steel modular bolted panels, 1,000 liters to 500,000 liters), PUMP (the CDL/CDLF booster pump series), CONTROL (the VFD duplex control panel), and SYSTEM (the combined turnkey package covering both the storage and pressure sides). Every project is scoped to the specific capacity, material, and pump requirement a site needs rather than sold off a fixed catalog size, which is what 'supplier' means in TankSmith's case: sourcing, sizing, delivering, installing, and commissioning a complete water system, not just dropping off a tank.
Capacity Range, Materials, and Certifications
TankSmith's modular tank systems range from 1,000 liters to 500,000 liters per system, sized panel by panel to match the exact footprint and volume a site needs rather than forcing a buyer into a fixed stock size. Four material options are available: FRP (fiberglass reinforced plastic) bolted panels, GRP/SMC (sheet moulded compound), hot-dip galvanized (HDG) steel, and stainless steel 304/316. Panels are WRAS-certified for potable water contact up to 65 degrees Celsius. Liners are NSF-compliant, and manufacturing runs through an ISO 9001 certified partner factory quality management system, with panels TUV SUD tested. TankSmith backs every FRP panel with a 3-year warranty, with a design life of 20 to 25 years for the system as a whole. Material choice depends on the application. FRP and GRP panels suit potable water and general storage where corrosion resistance and lighter weight matter. HDG steel suits budget-conscious fire reserve and process water applications where potable-grade certification is not required. Stainless steel 304/316 suits food-grade or corrosive environments where the highest material grade is warranted. TankSmith scopes the material recommendation to the water quality, budget, and site access constraints of each project, publishing the full capacity range and certification list here so a buyer or procurement team can confirm fit before requesting a quote, rather than having to ask for specs that should already be public.
Turnkey Supply, Install, and Commission Under One Contract
TankSmith's core service model is turnkey: one contract covers supply of the tank system, on-site installation, and commissioning, rather than splitting the work across a tank vendor, a separate installer, and a separate electrical contractor for the pump side. For most installations between 20 KL and 500 KL, the work completes in 5 to 14 days, with the exact duration depending on capacity and how ready the site's civil works (foundation, platform, access) are before the crew arrives. Commissioning covers both the mechanical side (tank assembly, pump installation, piping) and the electrical side (VFD duplex control panel wiring, pressure feedback calibration, auto-alternation setup between duplex pumps) under the same visit, so the system is tested and handed over live rather than left for a separate electrical subcontractor to finish later. This matters most for buyers who have been burned by a tank-only supplier who considers the job done at delivery, leaving pump integration, control panel wiring, and commissioning as a separate cost and a separate schedule to arrange. Because the tank and pump system are supplied and warrantied by the same team, there is a single point of accountability if something needs adjustment after commissioning, rather than two vendors pointing at each other's scope. This single-contract structure is the core differentiator TankSmith leads with across every material and capacity it supplies.
Nationwide Coverage: Where TankSmith Installs
TankSmith installs nationwide across the Philippines: NCR, Luzon, Visayas, and Mindanao, including PEZA and freeport industrial estates such as Subic Bay (SBMA), Clark, Cavite, and Batangas. The verticals served span commercial laundry operations (tank sizing based on kg/day linen throughput), hotels and resorts (including rooftop retrofits with booster pump integration), hospitals and clinics (where redundancy and code-compliant fire reserve capacity matter), food manufacturing (where WRAS-compliant potable water contact is required), warehouses and manufacturing facilities (fire reserve and process water), and condominiums and high-rise buildings (rooftop installs with tight-access retrofit constraints). For industrial estate projects inside SBMA, Clark, Cavite, or Batangas PEZA zones, TankSmith works within freeport site access and documentation requirements rather than treating those installs the same as an open commercial site. For high-rise and condominium rooftop retrofits, panels are sized and routed for tight-access delivery rather than assuming ground-level truck access, a common constraint that rules out some tank formats before capacity is even discussed. Nationwide coverage means TankSmith scopes projects across all four major island groups rather than defaulting to Metro Manila and treating outer provinces as a special case, which matters for procurement teams comparing suppliers who list coverage only for NCR.
Installation Timeline and Warranty
Most TankSmith installations between 20 KL and 500 KL complete in 5 to 14 days on site, with the exact number of days depending on the tank capacity and how far along the site's civil readiness is (foundation, platform, and access) before the installation crew arrives. Smaller systems at the low end of the capacity range and sites with civil work already complete tend toward the shorter end of that window; larger systems and sites requiring civil coordination alongside the tank install tend toward the longer end. Every FRP panel TankSmith supplies carries a 3-year warranty, with the system overall rated for a 20 to 25 year design life. This warranty and design-life figure apply to the FRP panel itself; buyers should confirm warranty terms for the pump and control panel components separately, as these carry their own manufacturer warranty terms tied to the CDL/CDLF pump series and Inovance VFD panels. Because TankSmith supplies, installs, and commissions under one contract, the installation timeline and warranty are set at the point of quotation rather than negotiated separately with a tank vendor and then again with an installer, which is the more common structure in the Philippine market for tank-only suppliers.
Choosing Between FRP, GRP, HDG Steel, and Stainless Steel
TankSmith supplies four panel materials, and the right choice depends on water quality requirements, budget, and site conditions rather than a single default. FRP (fiberglass reinforced plastic) bolted panels are corrosion-resistant and lighter than steel, making them a common choice for potable water storage where WRAS certification and NSF-compliant liners are required. GRP/SMC (sheet moulded compound) panels share similar corrosion resistance and are often specified alongside FRP depending on the panel design. Hot-dip galvanized (HDG) steel is typically the lower-cost option among the four, suited to fire reserve tanks and process water applications where potable-grade certification is not a requirement. Stainless steel 304 and 316 panels are the highest material grade TankSmith offers, specified for food manufacturing or other applications where corrosion resistance and hygiene requirements exceed what FRP or HDG steel can meet. All four materials are available across the same 1,000 liter to 500,000 liter capacity range, and TankSmith's site assessment process recommends a material based on the intended water use (potable, fire reserve, process), the water quality standard required (WRAS, NSF), and the budget and installation timeline constraints of the project, rather than selling a single material across every project type.
Frequently Asked Questions
Is TankSmith a manufacturer or a supplier of FRP tanks?
TankSmith is a supplier and installer, not a manufacturer. Panels are produced by an ISO 9001 certified partner factory and TUV SUD tested; TankSmith's scope covers site assessment, sizing, supply, delivery, installation, and commissioning under one contract, including the matching pressure booster pump system where required. This single-team model means one point of contact and one warranty covers both the tank and the pump side of the installation, rather than a manufacturer handling only the panel and leaving installation and pump integration to a separate contractor.
What capacity range does TankSmith offer for FRP tanks?
TankSmith supplies FRP, GRP, HDG steel, and stainless steel modular tank systems from 1,000 liters up to 500,000 liters per system. Because the panels are modular and bolted rather than one-piece, capacity is sized to the exact volume a site needs rather than rounded up to the nearest fixed stock size. This range covers everything from a small commercial rooftop tank to a large industrial fire reserve or process water system, with the same warranty and certification standards applying across the full range.
Does TankSmith install outside Metro Manila?
Yes. TankSmith installs nationwide across NCR, Luzon, Visayas, and Mindanao, including PEZA and freeport industrial estates such as Subic Bay (SBMA), Clark, Cavite, and Batangas. Projects inside freeport zones are scoped within that zone's site access and documentation requirements. Typical installations for capacities between 20 KL and 500 KL complete in 5 to 14 days on site, depending on capacity and how ready the site's civil works are before the installation crew arrives.
What certifications do TankSmith's tank panels carry?
Panels are WRAS-certified for potable water contact up to 65 degrees Celsius, with NSF-compliant liners. Manufacturing runs through an ISO 9001 certified partner factory quality management system, and panels are TUV SUD tested. Every FRP panel carries a 3-year warranty, with a 20 to 25 year design life for the system overall. These certifications apply specifically to the tank panels and liners; the booster pump and VFD control panel components carry their own separate manufacturer warranty terms.
Does TankSmith also supply the pressure booster pump, or just the tank?
Both. TankSmith supplies vertical multistage centrifugal booster pumps (CDL/CDLF series, 0.37 kW to 200 kW, SS304 construction) paired with VFD duplex control panels (Inovance VFDs, IP54-rated, with pressure feedback and auto-alternation), sized to match the tank system. Supplying both under one contract means the pump and tank are commissioned together rather than requiring a separate electrical contractor to integrate a pump bought elsewhere, and there is a single point of accountability for the complete water system rather than two vendors.
How long does a TankSmith FRP tank installation take?
Most installations between 20 KL and 500 KL complete in 5 to 14 days on site. The exact duration depends on the tank's capacity and how ready the site's civil works, such as the foundation, platform, and access route, are before the installation crew arrives. Sites with civil work already complete and smaller capacities tend toward the shorter end of that range; larger systems or sites needing civil coordination alongside the tank install tend toward the longer end.
Browse more configurations in the water tank systems directory.
Related Pages
- FRP Bolted Water Tank Systems in the Philippines: Supply, Install, Commission
- FRP Modular Tank Supplier in the Philippines: Supply, Install, Commission
- FRP Sectional Water Tank Price List Philippines: Capacity Bands and Cost Factors
- FRP Tank Installation in the Philippines: Process, Timeline, and Coverage
- Three-Pump Duty/Standby Pump-Out System with Proprietary Fibreglass Tanks
- FRP Water Storage Tank Installer in Cavite: Supply, Install, Commission
Found this useful? Add TankSmith as a Preferred Source on Google so our tank sizing guides show up first next time you search.