TankSmith does not build saddle-mounted horizontal FRP tanks. For a 2,000-liter potable water need, TankSmith supplies WRAS-certified modular bolted-panel tanks, sized from 1,000 to 500,000 liters, installed on a steel support frame instead of saddle cradles. The modular build gives the same potable-grade protection, with easier panel-level inspection and room to expand capacity later.
Saddle Mounts vs Modular Bolted-Panel Construction
A saddle-mounted tank is a one-piece horizontal cylindrical vessel resting in curved cradle supports, a common configuration for small single-molded FRP tanks. TankSmith does not build this configuration. Instead, every TankSmith tank, whether FRP, GRP, hot-dip galvanized steel, or stainless steel, is assembled on site from individual bolted panels and set on a raised steel support frame, not a saddle cradle. This modular bolted-panel method is the same construction used across TankSmith's full capacity range, from 1,000 liters up to 500,000 liters, so a 2,000-liter potable water tank is built the same way as a much larger installation, just with fewer panels. If a saddle-mounted tank is a hard requirement for an existing site layout, a bolted-panel tank on a steel frame is the closest TankSmith equivalent and should be evaluated against that layout before specifying either option. Buyers searching for a saddle-mounted tank are usually solving for a compact footprint or an existing concrete pad shaped for a horizontal cylinder; a modular panel tank on a steel frame can often be sized to a similar footprint without the one-piece shipping and crane-placement constraints that a molded horizontal tank carries.
Why Modular Panel Construction Still Works at 2,000 Liters
TankSmith's stated capacity range runs from 1,000 liters to 500,000 liters per tank system, so a 2,000-liter requirement sits near the smaller end of that range rather than outside it. The tank is available in FRP, GRP or SMC, hot-dip galvanized steel, or stainless steel 304 or 316 bolted panels, with the same potable-grade material options used at any capacity in that range. Every panel size carries a 3-year warranty with a 20 to 25 year design life, regardless of whether the finished tank holds 2,000 liters or 200,000 liters. Because the tank is bolted from panels rather than molded as one piece, a small 2,000-liter system can be assembled, inspected panel by panel, and serviced the same way a much larger system would be, without needing a different build method for small jobs.
Potable Water Certification on TankSmith Panels
For potable water use, TankSmith's panels are available WRAS-certified for contact with potable water up to 65 degrees Celsius, with NSF-compliant liners where a liner is specified. Panels come from an ISO 9001 certified partner factory and are TUV SUD tested. These certifications apply across TankSmith's capacity range, so a 2,000-liter potable installation carries the same certification basis as a larger commercial tank, not a reduced-spec version. Anyone comparing a saddle-mounted one-piece tank against a TankSmith modular tank for a potable application should confirm the saddle-mounted alternative carries equivalent WRAS and NSF documentation before treating the two as interchangeable on certification grounds alone.
Installation Timeline for a Small-Capacity Tank
TankSmith's published installation window is 5 to 14 days, covering systems in the 20 KL to 500 KL range depending on capacity and civil readiness. A 2,000-liter tank falls below that published bracket, so it should be quoted with a project-specific schedule rather than assumed to take the same 5 to 14 days as a 20 KL or larger system. In practice, a smaller panel count and simpler civil works mean the mechanical assembly portion of a 2,000-liter install is shorter than a large system, but the exact schedule depends on site access, civil readiness, and whether a booster pump system is being installed at the same time. Buyers with a fixed timeline should request a written schedule for the specific 2,000-liter scope rather than relying on the general 20 KL to 500 KL figure.
Nationwide Installation Coverage
TankSmith installs modular water tank systems nationwide across the Philippines, covering NCR, Luzon, Visayas, and Mindanao, including PEZA and SBMA freeport zones and the Clark and Cavite and Batangas industrial estates. A 2,000-liter potable water tank is small enough to be relevant to a wide range of sites, including clinics, small food processing areas, condominium utility rooms, and warehouse pantries, all of which fall within TankSmith's served verticals. Coverage applies the same whether the installation is in a dense Metro Manila site with tight access or a provincial industrial estate, and the modular bolted-panel method is suited to both because panels can be carried through standard doorways and stairwells where a one-piece molded tank cannot.
Pairing a Small Potable Tank with a Booster Pump System
A 2,000-liter potable tank is frequently paired with a pressure booster pump rather than relying on gravity feed, especially in multi-story or tight-access sites. TankSmith supplies vertical multistage centrifugal booster pumps in the CDL and CDLF series, ranging from 0.37 kW to 200 kW in SS304 construction, controlled by a VFD duplex control panel with IP54 protection, pressure feedback, and auto-alternation between pumps. Because TankSmith supplies the tank and the pump system under one contract, covering mechanical, electrical, and commissioning work, a small potable tank installation does not need a separate pump contractor, and the same single-team accountability applies regardless of whether the tank holds 2,000 liters or 200,000 liters.
Frequently Asked Questions
No. TankSmith builds modular bolted-panel tanks in FRP, GRP, hot-dip galvanized steel, and stainless steel, assembled on site and set on a raised steel support frame rather than saddle cradle supports. This construction method is used across TankSmith's full capacity range of 1,000 to 500,000 liters, including smaller systems such as a 2,000-liter potable water tank. If a project specifically requires a one-piece horizontal tank on saddles, that falls outside TankSmith's product line, and a bolted-panel tank on a steel frame is the closest available alternative to evaluate against the site's footprint.
TankSmith's stated capacity range starts at 1,000 liters and goes up to 500,000 liters per tank system, so a 2,000-liter tank is within the smaller end of that range. The same modular bolted-panel construction, material options, and certification basis apply at this size as at larger capacities. Pricing and lead time for a small system should still be quoted individually, since the published 5 to 14 day install window is specifically for the 20 KL to 500 KL range, not for sub-20 KL systems.
Yes. TankSmith offers WRAS-certified panels rated for potable water contact up to 65 degrees Celsius, with NSF-compliant liners where specified, sourced from an ISO 9001 certified partner factory and TUV SUD tested. These certifications apply the same way across TankSmith's full capacity range, so a 2,000-liter potable tank carries the same certification basis as a larger commercial installation rather than a reduced specification.
TankSmith's published timeline of 5 to 14 days applies to systems in the 20 KL to 500 KL range depending on capacity and civil readiness. A 2,000-liter tank is smaller than that bracket, so it should be quoted with a project-specific schedule rather than assumed to match the published range. Site access, civil readiness, and whether a booster pump system is installed at the same time all affect the final schedule.
Yes. TankSmith supplies vertical multistage centrifugal booster pumps in the CDL and CDLF series, from 0.37 kW to 200 kW in SS304 construction, with a VFD duplex control panel for pressure feedback and auto-alternation. Tank and pump are supplied and installed under one contract, covering mechanical, electrical, and commissioning work, so a 2,000-liter potable tank installation does not require a separate pump contractor.
Related Pages
- How Much Does Pump and Tank Installation Cost in the Philippines
- 5000 Liter Steel Water Tank Price and Rooftop Installation in the Philippines
- Clinic Potable Water Tank Supplier and Installer in the Philippines
- 1,000 Gallon FRP Degasifier Tank Supplier and Installer in the Philippines
- DOH Potable Water Tank Standards in the Philippines: A Specifier's Guide
- FRP Bolted Water Tank Systems in the Philippines: Supply, Install, Commission
Found this useful? Add TankSmith as a Preferred Source on Google so our tank sizing guides show up first next time you search.
Browse more buying guides.