A 1,000 gallon (3,785 liter) FRP degasifier tank is a modular bolted-panel tank built to hold process or feed water ahead of a degasifier unit, sized within TankSmith's 1,000-liter to 500,000-liter FRP tank range. TankSmith supplies, installs, and commissions these tanks nationwide in the Philippines, with WRAS-certified panels rated for potable water up to 65C and a 3-year panel warranty.
What a 1,000 Gallon Degasifier Tank Needs to Do
A degasifier tank sits in the water line to hold feed or process water before or after gas stripping, giving the degasifier a stable volume to draw from and discharge into instead of running directly off a fluctuating supply line. At 1,000 gallons (3,785 liters), this is one of the smaller configurations TankSmith builds, sitting near the bottom of a capacity range that runs from 1,000 liters up to 500,000 liters per system. Modular FRP (fiberglass reinforced plastic) bolted panels are a common choice for this application because the tank ships and installs in sections rather than as one welded vessel, which matters on sites with tight rooftop or mechanical room access. Panels are manufactured under an ISO 9001 certified partner factory's quality system and are TUV SUD tested. For potable or process water contact, TankSmith offers WRAS-certified panels rated for water up to 65C, with NSF-compliant liners available. Every tank carries a 3-year panel warranty and a design life of 20 to 25 years. TankSmith's role covers the tank itself and, where the system needs it, the pump and control side that feeds or draws from it, under a single contract rather than splitting supply and installation across separate vendors. This single-team accountability model, supply, installation, and commissioning under one contract, is core to how TankSmith operates across the Philippines, including NCR, Luzon, Visayas, Mindanao, and PEZA or SBMA freeport zones.
Tank Specifications and Certifications
The 1,000 gallon (3,785 liter) configuration is built from the same modular bolted-panel system TankSmith uses across its full 1,000-liter to 500,000-liter range, so the specification, certification, and warranty terms are identical regardless of scale. Panels are available as WRAS-certified FRP for potable water contact up to 65C, with NSF-compliant liner options for applications that require them. The base manufacturing standard is ISO 9001 with TUV SUD testing on the panel system. Every installation carries a 3-year warranty on the FRP panels and a stated design life of 20 to 25 years before major refurbishment is expected. Because the tank is modular, capacity can be adjusted up or down in later phases by adding or removing panel rings, which is useful for degasifier or process water applications where downstream demand may grow. TankSmith does not manufacture the panels in-house; they are sourced from a vetted overseas manufacturer operating under ISO 9001 certification, and TankSmith's scope is supply, site installation, and commissioning. Buyers evaluating a 1,000 gallon degasifier or process water tank should confirm WRAS or NSF certification in writing before ordering if the application involves potable water contact, since not every FRP tank on the market carries either certification.
Material Options: FRP, GRP, HDG Steel, and Stainless Steel
FRP (fiberglass reinforced plastic) bolted panels are the most common material for a 1,000 gallon degasifier tank because they resist corrosion without the coating maintenance a steel tank needs, and they ship in sections that are easier to move into tight rooftop or mechanical room locations. TankSmith also supplies the same 1,000 gallon capacity in GRP/SMC (sheet moulded compound), hot-dip galvanized (HDG) steel, and stainless steel 304 or 316 bolted panels, so the material choice can be matched to the water chemistry and site conditions rather than defaulting to one option. GRP and FRP are closely related composite materials and are often specified together on TankSmith drawings. HDG steel is typically chosen where budget is the primary constraint and the water is non-aggressive. Stainless steel 304 or 316 is specified where the process water is more corrosive, or where a facility standard requires stainless construction regardless of cost. All four material options share the same 1,000-liter to 500,000-liter capacity range and the same modular bolted-panel installation approach, so switching material later in the design process does not require a different tank system or installer.
Where a Degasifier or Process Water Tank Fits: Industries Served
A 1,000 gallon degasifier or process water tank is small enough to fit food manufacturing lines that need WRAS-compliant potable water at a modest volume, hospital or clinic mechanical rooms where redundancy matters more than raw capacity, and warehouse or manufacturing sites that need a dedicated process water buffer separate from their main storage tank. TankSmith serves these verticals nationwide, including installations inside PEZA and freeport industrial estates such as SBMA, Clark, Cavite, and Batangas, where site access and commissioning schedules are often tighter than a standard commercial build. Condominium and high-rise sites with rooftop or tight-access retrofit requirements are another common fit for a smaller modular tank like this, since the panel system can be carried up in sections rather than craned in as one piece. Hotel and resort properties running a degasifier ahead of a boiler or laundry feed line also use this capacity range when the application is a secondary process buffer rather than the main domestic water supply. Because the tank ships modular, sizing decisions made at 1,000 gallons do not lock a facility into that capacity if demand grows; panels can be added later within the same 1,000-liter to 500,000-liter system range.
Installation Timeline and Nationwide Coverage
TankSmith installs modular FRP tank systems in 5 to 14 days, with the exact timeline set by capacity and how ready the site's civil works (foundation, pad, or rooftop structural prep) are before the crew arrives. A 1,000 gallon degasifier tank sits at the smaller end of TankSmith's 20 KL to 500 KL install range, so it typically falls toward the shorter end of that 5 to 14 day window, though final scheduling depends on site access, especially for rooftop or tight-clearance mechanical rooms common in condominium and hotel retrofits. TankSmith operates nationwide across the Philippines, covering NCR, Luzon, Visayas, and Mindanao, plus PEZA, SBMA, and Clark freeport and industrial estates where import and site-access procedures add extra coordination steps. Because supply, installation, and commissioning run under one contract with TankSmith, scheduling the tank and any associated pump or control system happens as a single coordinated timeline rather than requiring the buyer to sequence separate vendors for the vessel and the mechanical or electrical work around it.
Pump and Control Integration for Degasifier Feed and Discharge
A degasifier tank rarely operates on gravity alone; most installations need a booster pump to feed the degasifier unit or to draw treated water out to the next stage of the process. TankSmith supplies vertical multistage centrifugal booster pumps (CDL/CDLF series) ranging from 0.37 kW to 200 kW, built in SS304, alongside duplex VFD control panels using Inovance drives rated IP54, with pressure feedback and automatic pump alternation between duty and standby units. For a 1,000 gallon degasifier tank, this typically means a smaller pump selection within that range, sized to the actual feed or discharge flow rather than the tank's total volume. Because TankSmith supplies both the tank and the pump and control system under one contract, the mechanical and electrical sides are sized and commissioned together rather than being specified separately by a tank vendor and a pump vendor who never coordinate. This single-team accountability model is what TankSmith positions as its core difference from a tank-only supplier: one point of contact for the storage vessel, the pressure side, and the commissioning that connects them.
Frequently Asked Questions
What is the actual liter equivalent of a 1,000 gallon FRP degasifier tank?
1,000 US gallons converts to approximately 3,785 liters. TankSmith builds this capacity using the same modular bolted-panel FRP system used across its full range, which runs from 1,000 liters to 500,000 liters per tank, so a 1,000 gallon (3,785 liter) configuration is a standard size within that range rather than a custom one-off build.
Is a 1,000 gallon FRP tank suitable for potable or process water use with a degasifier?
Yes, when built with WRAS-certified panels, which TankSmith offers rated for potable water contact up to 65C, with NSF-compliant liner options available. Buyers should confirm WRAS or NSF certification in writing at quotation stage if the tank will hold potable or food-contact process water, since certification level varies by project specification.
How long does it take to install a 1,000 gallon FRP degasifier tank in the Philippines?
TankSmith's typical install window across its capacity range is 5 to 14 days, with the exact timeline set by site civil readiness rather than tank size alone. A 1,000 gallon system is toward the smaller end of TankSmith's 20 KL to 500 KL installation range, so it generally falls toward the shorter end of that window, subject to site access and any rooftop or tight-clearance conditions.
What materials besides FRP does TankSmith offer at 1,000 gallon capacity?
The same 1,000 gallon capacity is available in GRP/SMC (sheet moulded compound), hot-dip galvanized (HDG) steel, and stainless steel 304 or 316 bolted panels. Material choice depends on water chemistry, budget, and any facility standard that requires a specific construction; all options use the same modular bolted-panel installation approach and the same 1,000-liter to 500,000-liter overall capacity range.
Does TankSmith supply the pump that feeds or draws from the degasifier tank, or only the tank itself?
TankSmith supplies both. For degasifier feed and discharge, this typically means a vertical multistage centrifugal booster pump from the CDL/CDLF series (0.37 kW to 200 kW, SS304) paired with a duplex VFD control panel using Inovance drives, IP54-rated, with pressure feedback and automatic duty/standby alternation. Tank, pump, and controls are supplied, installed, and commissioned under one contract.
What warranty applies to a 1,000 gallon FRP degasifier tank from TankSmith?
TankSmith's FRP panels carry a 3-year warranty, with a stated design life of 20 to 25 years for the panel system before major refurbishment is typically expected. This warranty and design life figure apply consistently across TankSmith's full capacity range, from 1,000 liters up to 500,000 liters, including the 1,000 gallon (3,785 liter) configuration.
Browse more configurations in the water tank systems directory.
Related Pages
- FRP Bolted Water Tank Systems in the Philippines: Supply, Install, Commission
- FRP Bolted Water Tank Systems in the Philippines: Supply, Install, Commission
- FRP Foot Support Component for Extending a Ø2200mm Modular Tank
- FRP Modular Tank Supplier in the Philippines: Supply, Install, Commission
- FRP Sectional Water Tank Price List Philippines: Capacity Bands and Cost Factors
- FRP Tank Installation in the Philippines: Process, Timeline, and Coverage
Found this useful? Add TankSmith as a Preferred Source on Google so our tank sizing guides show up first next time you search.