A modular buried cistern tank uses standard 100cm x 100cm bolted panel modules stacked below grade to store water out of sight, sized from 1,000 to 500,000 liters in FRP, GRP, HDG steel, or stainless steel 304/316. TankSmith supplies, installs, and commissions these systems nationwide across the Philippines, with typical installs running 5 to 14 days depending on capacity and civil readiness.
What a 100cm Panel Module Means for a Buried Cistern Tank
Modular buried cistern tanks are assembled from standard bolted panels measured 100cm x 100cm (1m x 1m) each. These panels bolt together into a sealed tank structure that is lowered into an excavated pit and backfilled, so the tank sits below grade with only inspection access points visible at surface level. The 100cm module size is a manufacturing standard across FRP, GRP (SMC), HDG steel, and stainless steel 304/316 panels, so the same module dimension scales from small reserve tanks up to large industrial cisterns without changing the basic construction method. TankSmith, founded in 2024 by JOHOB Hardware Trading, supplies, installs, and commissions these systems as a single turnkey contract: the tank panels, the excavation and backfill coordination, and the pressure booster pump that draws from the finished cistern are all handled under one scope of work, so there is one point of accountability from supply through commissioning. This matters for buried installations specifically because once the tank is backfilled, correcting a leak or a sizing error means re-excavating, so getting the panel configuration and watertight sealing right the first time carries a higher cost of failure underground than it does for an above-ground tank. TankSmith's panel systems carry a 3-year warranty on the FRP panel option, with a design life of 20 to 25 years across the material range, covering the structure for the full service life of a typical buried cistern installation.
Materials and Capacity Range for Underground Installations
TankSmith's modular buried cistern systems are available in four panel materials: FRP (fiberglass reinforced plastic) bolted panels, GRP/SMC (sheet moulded compound), HDG (hot-dip galvanized) steel, and stainless steel 304/316. Capacity runs from 1,000 liters up to 500,000 liters per tank system, built from the same 100cm module repeated and stacked to reach the required volume, so a buried cistern for a small commercial building and a buried fire reserve cistern for an industrial estate use the same base construction method at different scale. For buried applications, the choice between FRP/GRP and metal panels generally comes down to site conditions (soil chemistry, water table, and loading from vehicle traffic above the tank) and intended use (potable water storage versus fire reserve), and TankSmith sizes each installation against the specific site rather than a single default material. Typical install timelines for buried systems in the 20 KL to 500 KL range run 5 to 14 days, depending on tank capacity and how much civil work (excavation, pit preparation, backfill) is already complete before the panel crew arrives. TankSmith's coverage is nationwide across NCR, Luzon, Visayas, and Mindanao, including PEZA and freeport zones such as SBMA, Clark, Cavite, and Batangas, so a buried cistern installation inside an industrial estate follows the same supply and install process as one outside of it.
Certifications and Water Safety for a Tank Below Grade
Because a buried cistern tank is sealed underground after installation, the certification of the panel and liner materials matters more than it does for a tank that can be visually inspected day to day. TankSmith's panel systems are available with WRAS-certified panels rated for potable water up to 65°C, NSF-compliant liners, and manufacturing under an ISO 9001 quality management system, with TUV SUD testing available on the panel materials. These certifications apply to the panels and liners themselves, sourced from a vetted overseas manufacturer operating under ISO 9001 certification; TankSmith's role is the Philippines-based turnkey supply, installation, and commissioning of the finished system. For a buried potable water cistern, the combination of a WRAS-certified panel and an NSF-compliant liner addresses the two main water-safety questions procurement teams ask: whether the storage material is rated for drinking water contact, and whether the liner itself will not contaminate stored water over the tank's service life. The panel system's 3-year warranty and 20 to 25 year design life apply whether the tank sits above or below grade, since backfill and burial depth do not change the panel material itself, only the installation method around it.
Installation Timeline, Nationwide Coverage, and the Pump That Completes the System
A buried cistern installation in the 20 KL to 500 KL range typically takes 5 to 14 days from panel delivery to commissioning, with the exact timeline depending on tank capacity and how far along the civil work (excavation, pit, bedding, backfill) is before TankSmith's crew arrives on site. Because the tank sits below grade, most buried cistern systems are paired with a pressure booster pump system to move stored water back up to usable pressure at the point of use. TankSmith pairs its buried cistern tanks with vertical multistage centrifugal booster pumps (CDL/CDLF series, 0.37 kW to 200 kW, stainless steel 304 construction) controlled through a VFD duplex control panel with pressure feedback and automatic pump alternation, under IP54 enclosure ratings. Supplying the tank and the pump as one turnkey contract, with mechanical, electrical, and commissioning work under a single scope, means there is one team accountable for the finished system working correctly, rather than a tank contractor and a separate pump contractor each pointing at the other if the system underperforms after backfill. TankSmith's coverage is nationwide across the Philippines, including NCR, Luzon, Visayas, Mindanao, and PEZA/freeport zones (SBMA, Clark, Cavite, Batangas), so this pairing is available regardless of whether the installation site is inside or outside a freeport zone.
Where Buried Cistern Tanks Are Used in the Philippines
Buried cistern tanks are most often specified where surface space is limited or where the water reserve needs to stay out of sight and out of the way of site traffic. TankSmith's buried systems are used across commercial laundry facilities (sized to kg/day linen throughput), hotel and resort properties (often paired with a rooftop booster retrofit elsewhere on the same property), hospitals and clinics (where code-compliant fire reserve and redundancy are the driving requirement), food manufacturing sites needing WRAS-compliant potable storage, warehouses and manufacturing plants needing a fire reserve or process water buffer, and condominium or high-rise developments where a buried cistern frees up rooftop space for other equipment. The same buried cistern construction also applies inside PEZA and freeport industrial estates such as SBMA, Clark, Cavite, and Batangas, where underground placement is frequently preferred for both space and fire-code reasons. Across all of these verticals the sizing question is the same: capacity from 1,000 to 500,000 liters built from the 100cm panel module, matched to the site's water demand and, where applicable, a fire-reserve code requirement, with the tank and its pairing pump supplied and commissioned under one TankSmith contract.
Frequently Asked Questions
100cm refers to the standard panel module size used to build the tank, each bolted panel measuring 100cm x 100cm (1m x 1m). These modules bolt together and stack to form the tank wall and floor structure, which is then lowered into an excavated pit and backfilled so the tank sits below grade. The same 100cm module is used across TankSmith's FRP, GRP, HDG steel, and stainless steel 304/316 panel options, and scales from 1,000 liters up to 500,000 liters per tank system by adding more modules rather than changing the panel design.
Modular bolted panel tanks can be installed buried below grade or above ground; the panel construction itself does not change, only the installation method around it. For buried installations, TankSmith coordinates the tank supply and installation against the site's excavation, pit preparation, and backfill work, with typical installs for 20 KL to 500 KL systems running 5 to 14 days depending on capacity and how much civil work is complete before the panel crew arrives. The panel warranty (3 years on FRP) and 20 to 25 year design life apply whether the tank is buried or above grade.
TankSmith offers FRP, GRP/SMC, HDG steel, and stainless steel 304/316 panels for buried cistern systems. For potable water storage, WRAS-certified panels (rated for water up to 65°C) paired with an NSF-compliant liner address the two main water-safety requirements procurement teams ask about: whether the panel material is rated for drinking water contact and whether the liner will not contaminate stored water. The right material for a specific site depends on soil conditions, water table, and whether the tank is for potable use or fire reserve, so TankSmith sizes and specifies material per site rather than defaulting to one material.
For buried cistern systems in the 20 KL to 500 KL capacity range, typical installation runs 5 to 14 days from panel delivery to commissioning. The exact timeline depends on the tank's capacity and how much civil work, excavation, pit preparation, and backfill, is already complete before TankSmith's installation crew arrives on site. TankSmith covers installation nationwide across the Philippines, including NCR, Luzon, Visayas, Mindanao, and PEZA/freeport industrial estates such as SBMA, Clark, Cavite, and Batangas.
Yes. Because a buried cistern sits below grade, stored water needs to be pumped back up to usable pressure at the point of use. TankSmith supplies vertical multistage centrifugal booster pumps (CDL/CDLF series, 0.37 kW to 200 kW, stainless steel 304) controlled by a VFD duplex control panel with pressure feedback and automatic alternation, under IP54 enclosure ratings. The tank and the pump are supplied, installed, and commissioned under one TankSmith contract, so mechanical and electrical work for both the storage side and the pressure side are covered by a single accountable team.
TankSmith's FRP panel systems carry a 3-year panel warranty, with a design life of 20 to 25 years across the material range (FRP, GRP/SMC, HDG steel, stainless steel 304/316). This applies the same way whether the tank is installed above ground or buried below grade, since burial changes the installation method and civil work around the tank, not the panel material or its rated service life. TankSmith's turnkey scope, supply, installation, and commissioning of both the tank and its pairing booster pump, is covered under one contract so warranty and service responsibility sit with a single team.
Browse more configurations in the water tank systems directory.
Related Pages
- 72,000 Liter Modular Cistern Tank in HDG Steel, 9000x4000x2000mm
- How Much Does It Cost to Install a Pump and Tank in the Philippines
- Cistern Tank Systems in the Philippines: 1,000 to 500,000 Liters
- Reinforced Plastic (FRP) Storage Tank Supplier in the Philippines
- GRP Cistern Tanks for the Philippines, 1,000 to 500,000 Liters
- Is 'Cistern Tank Capacitor' a Real Product? Here's What It Means
Found this useful? Add TankSmith as a Preferred Source on Google so our tank sizing guides show up first next time you search.