TankSmith is a Philippines-based tank fabricator that assembles and installs modular water tank systems, FRP, GRP, hot-dip galvanized steel, and stainless steel 304/316 bolted panels, sourced through an ISO 9001 certified partner factory. Systems range from 1,000 to 500,000 liters, carry WRAS-certified panels rated for potable water up to 65 degrees Celsius, and pair with matching booster pump systems. Installation nationwide takes 5 to 14 days under one contract covering supply, install, and commissioning, backed by a 3-year panel warranty.
What a Steel Tank Fabricator Does, From Panel Sourcing to Commissioning
A steel tank fabricator in the Philippines takes modular panels, sourced from an ISO 9001 certified partner factory, and turns them into a finished, commissioned water storage system on your site. TankSmith works this way rather than running its own steel mill: panels arrive pre-cut and pre-coated, the crew bolts them into the tank shell on site, seals the joints, and integrates the pump and control system before handover. This is the distinction procurement teams should understand when comparing quotes: a fabricator assembles and installs engineered components under one contract, covering supply, install, and commissioning, while a straight manufacturer only sells the panels and leaves assembly to someone else. TankSmith's scope runs from the first site survey through final commissioning, so there is one point of accountability for both the tank structure and the booster pump system that pressurizes it. For buyers, this matters most when something needs adjusting mid-install, since there is no gap between the party who built the shell and the party who wired the pump controls. Systems fabricated this way range from 1,000 to 500,000 liters per tank, sized to the site's water demand and footprint, and installation nationwide typically runs 5 to 14 days depending on capacity and how ready the civil works and electrical supply are when the crew arrives.
Choosing Between FRP, HDG Steel, and Stainless Steel Panels
TankSmith fabricates modular tanks in four panel materials: FRP (fiberglass reinforced plastic), GRP/SMC (sheet moulded compound), hot-dip galvanized (HDG) steel, and stainless steel 304 or 316. FRP and GRP panels suit most commercial and institutional sites, since they resist corrosion without a protective coating and work well for potable water, fire reserve, and process water tanks. HDG steel panels cost less upfront and work for applications where the hot-dip galvanized coating's service life fits the project's budget and timeline. Stainless steel 304 or 316 panels go into food-grade applications, or sites where the client specifically wants a steel finish for washdown or corrosion reasons beyond what galvanizing covers. All four material lines carry a 3-year panel warranty and a design life of 20 to 25 years. Potable water installations can also specify WRAS-certified panels, rated for water up to 65 degrees Celsius, and NSF-compliant liners where food-contact storage is required. The panels come from an ISO 9001 certified partner factory and have been TUV SUD tested, so the certification paperwork is available for procurement teams that need to document compliance before signing. Choosing between the four materials usually comes down to budget, water quality requirements, and how corrosive the site's environment is, not a single best answer across every project.
Pump and Control Integration: The System Side of Fabrication
Tank fabrication only solves half the water system. TankSmith pairs every tank with a matching booster pump system, built around vertical multistage centrifugal pumps in the CDL or CDLF series, ranging from 0.37 kW to 200 kW, constructed in SS304. Pump sizing follows the same site survey that sizes the tank, so the two components arrive matched rather than retrofitted against each other after the fact. Control comes from a VFD duplex control panel, rated IP54, with pressure feedback and auto-alternation between pump units, so the system can run one pump while the second stays on standby and the controller switches automatically if demand spikes or a unit needs servicing. This is the part of fabrication that a pure panel supplier cannot offer: mechanical and electrical integration under the same contract as the tank structure, commissioned together rather than handed off between separate vendors. For procurement teams evaluating fabricators, asking whether pump and control integration is included, or whether it is a separate line item with a separate contractor, is one of the clearest ways to compare quotes on equal footing.
Certifications and Compliance to Check Before You Sign
Before signing with any steel tank fabricator in the Philippines, ask for the certification paperwork directly rather than taking a sales claim at face value. TankSmith's panels carry WRAS certification for potable water applications up to 65 degrees Celsius, NSF-compliant liners where food-contact storage is required, and come from an ISO 9001 certified partner factory with TUV SUD testing on file. The warranty structure is straightforward: 3 years on the FRP panel itself, with a 20 to 25 year design life across the tank materials TankSmith fabricates. None of this paperwork substitutes for site-specific engineering, so procurement teams should still confirm capacity, materials, and timeline against their own site survey rather than a generic spec sheet. Certifications matter most as a paper trail: if a dispute comes up later over material quality or installation defects, having WRAS, NSF, ISO 9001, and TUV SUD documentation on file gives both sides something concrete to point to before work starts, not after.
Sizing a Fabricated Tank System by Industry
The right tank size depends on what the water is for, not just square footage on site. Commercial laundries size around kg per day of linen throughput, since wash cycle water demand scales directly with volume processed. Hotels and resorts most often need a rooftop retrofit, paired with booster pump integration to maintain pressure across upper floors. Hospitals and clinics size for redundancy and a code-compliant fire reserve, since downtime on water supply is not an option in a clinical setting. Food manufacturing sites need WRAS-compliant potable water storage specifically, given the product-contact requirements involved. Warehouses and manufacturing plants typically split capacity between fire reserve and process water. Condominiums and high-rises tend to need rooftop installs where tight access during the retrofit, not capacity, is the harder engineering problem. TankSmith fabricates across this full range, from 1,000 liters up to 500,000 liters per system, and also serves installations inside PEZA and freeport zones, including Subic Bay (SBMA), Clark, Cavite, and Batangas industrial estates, where site access and documentation can add steps that a straightforward commercial install does not have.
Nationwide Fabrication and Installation Coverage
TankSmith fabricates and installs nationwide, covering NCR, the rest of Luzon, Visayas, and Mindanao, with specific experience inside PEZA and freeport-zone sites such as SBMA, Clark, Cavite, and Batangas. Installation timelines run 5 to 14 days for systems between 20 KL and 500 KL, depending on tank capacity and how ready the site's civil works and electrical supply are before the crew arrives. Because fabrication and installation happen under one contract, there is no handoff between a panel supplier and a separate installation contractor, which is typically where schedule slippage happens on multi-vendor projects. Procurement teams working across multiple regions or multiple sites can scope the same fabrication and installation process at each location, with timeline estimates adjusted per site readiness rather than a flat national rate. For buyers planning a rollout across more than one facility, confirming civil readiness ahead of the crew's arrival is the single biggest factor in keeping each site's installation inside the 5 to 14 day window.
Frequently Asked Questions
A manufacturer makes the raw panels in a factory. A fabricator like TankSmith takes those panels, sourced from an ISO 9001 certified partner factory, and assembles, installs, and commissions them into a finished tank system on your site. TankSmith's scope covers the full process: site survey, panel assembly, pump and control integration, and commissioning, all under one contract rather than split between a panel supplier and a separate installation contractor. This matters for procurement because it puts supply, install, and commissioning accountability with one party instead of two, which reduces the coordination gap when something needs adjusting mid-install.
TankSmith fabricates modular tank systems from 1,000 liters up to 500,000 liters per system, in FRP, GRP, hot-dip galvanized steel, and stainless steel 304 or 316 bolted panels. Sizing is based on the site's actual water demand rather than a fixed catalog size, so the final capacity gets confirmed during the site survey against factors like linen throughput for laundries, fire reserve requirements for hospitals and warehouses, or peak-hour demand for hotels and condominiums. Installation timelines for systems in the 20 KL to 500 KL range typically run 5 to 14 days, depending on capacity and site readiness.
For systems between 20 KL and 500 KL, installation nationwide typically runs 5 to 14 days. The exact timeline depends on tank capacity and how ready the site's civil works and electrical supply are when the crew arrives, since delays on the civil side are the most common reason a project runs past the estimated window. Because TankSmith handles fabrication, installation, and pump and control commissioning under one contract, there is no added wait between finishing the tank shell and getting the booster pump system running, which is a common source of schedule slippage on projects split between separate vendors.
TankSmith's panels are WRAS-certified for potable water applications up to 65 degrees Celsius, and NSF-compliant liners are available where food-contact storage is required. The panels come from an ISO 9001 certified partner factory and have been TUV SUD tested. TankSmith backs the FRP panel with a 3-year warranty, and the tank systems it fabricates carry a 20 to 25 year design life. Procurement teams can request this documentation directly before signing, rather than relying on a general certification claim in marketing copy.
Yes. Every tank system TankSmith fabricates can be paired with a matching booster pump system built around vertical multistage centrifugal pumps in the CDL or CDLF series, ranging from 0.37 kW to 200 kW in SS304 construction, controlled through a VFD duplex panel rated IP54 with pressure feedback and auto-alternation. Pump sizing is based on the same site survey used to size the tank, so the two arrive matched rather than retrofitted against each other later. This mechanical and electrical integration happens under the same contract as the tank fabrication itself, commissioned together before handover.
Browse more configurations in the water tank systems directory.
Related Pages
- 5000 Liter Steel Water Tank Price and Rooftop Installation in the Philippines
- Food Grade Stainless Steel Water Tank Systems for the Philippines
- Stainless Steel 304 80,000 Liter Tank Price Guide Philippines
- FRP vs Stainless Steel Water Tank for Commercial Use in the Philippines
- Glass Fused to Steel Tank Price in the Philippines: 10mm Plate Cost Guide
- Stainless Steel Water Tank Maximum Capacity in the Philippines
Found this useful? Add TankSmith as a Preferred Source on Google so our tank sizing guides show up first next time you search.