Water Tank Supply and Installation for Quezon City Buildings
TankSmith is a Philippines-based turnkey installer of modular water tank systems serving Quezon City and the rest of Metro Manila. We supply modular bolted panel tanks in FRP, GRP, HDG steel and stainless steel, from 1,000 liters up to 500,000 liters per tank system, and we install and commission them ourselves rather than handing the job to a separate contractor. Most Quezon City buildings that call us are not buying a tank in isolation. They are solving a pressure or storage problem in an occupied building: a commercial laundry that needs storage sized to its daily linen throughput, a hotel that needs a rooftop tank swapped without shutting down floors, a hospital that needs redundancy and a code-compliant fire reserve, a condominium with a rooftop that no crane can reach. Because the panels are bolted and assembled on site, the tank arrives as flat panels and is built inside the plant room or on the roof deck, which is what makes tight-access Quezon City retrofits possible at all. Typical installs of 20 KL to 500 KL run 5 to 14 days depending on capacity and civil readiness, per the typical installation timeline. One team handles supply, install and commissioning under one contract.
Tank Materials We Supply in Quezon City: FRP, GRP, HDG Steel and Stainless
We supply four panel materials and specify them against the building, not against a catalogue default. FRP (fiberglass reinforced plastic) bolted panels are the usual choice for potable storage in commercial and residential buildings, and they carry a 3-year panel warranty with a 20 to 25 year design life. GRP and SMC (sheet moulded compound) panels cover the same potable duty with a different moulding process. HDG steel (hot-dip galvanized) panels suit fire reserve and process water duties where mechanical robustness matters more than weight. Stainless steel 304 and 316 panels are for food manufacturing, pharmaceutical-grade potable duty and any application where the client wants a full stainless wetted surface. For potable water in Quezon City buildings we specify WRAS-certified water tanks in the Philippines, rated for potable service up to 65C, with NSF-compliant liners where required. Panels come from ISO 9001 manufacturer QMS partner factories and are TUV SUD tested. The practical difference between these materials in a Quezon City retrofit is usually access and dead load, not chemistry, which is why we size and specify after a site assessment rather than from a price list. For peso context, see the water tank price guide for the Philippines.
Tank and Booster Pump Under One Contract
A water tank on its own does not fix low pressure on the upper floors, and this is where most Quezon City projects go wrong. The storage side and the pressure side are usually bought from two suppliers, and a water tank supplier that stops at the tank leaves the pressure half unowned, which means two schedules, two scopes and two parties to blame when the commissioned pressure does not match the design. TankSmith supplies both. On the pressure side we install the vertical multistage centrifugal pressure booster pump system range in the CDL and CDLF series, SS304 construction, from 0.37 kW up to 200 kW, sized against the building's actual demand profile and static head rather than a rule of thumb. Control is by VFD duplex control panel using Inovance drives, IP54 rated, with pressure feedback and automatic alternation between pumps so duty hours are shared and one pump is always available if the other is down for service. The whole assembly is delivered as one turnkey scope: tank, pumps, panel, pipework, commissioning. For a Quezon City hotel, hospital or high-rise that means one contract, one commissioning date and one warranty conversation.
Sizing from 1,000 Liters to 500,000 Liters for Quezon City Projects
Capacity is the first question and it is rarely a round number. We build modular systems from 1,000 liters up to 500,000 liters per tank system, and because the tanks are panel-built the footprint and height can be adjusted to the space you actually have. Small commercial and residential jobs typically sit in the 10 KL to 25 KL band. Mid-size Quezon City buildings, schools, clinics and mid-rise residential tend to land between 25 KL and 100 KL. Fire reserve and large commercial storage runs from 100 KL to 500 KL. Sizing method depends on the vertical: commercial laundry per kilogram of linen per day, hotels against occupancy and peak draw, hospitals against redundancy and a code-compliant fire reserve, food manufacturing against process demand with WRAS-compliant potable specification throughout. We do not quote a capacity until we know the draw profile, the footprint, the slab or roof deck loading and the panel route. Three Quezon City project configurations are documented on this site: the 100 m3 fire reserve tank system in Quezon City, the 150 m3 mall water tank system in Quezon City, and the 50 m3 school water tank system in Quezon City.
Rooftop and Tight-Access Retrofit Work in Quezon City
Quezon City retrofits are constrained by access more than by anything else. Existing plant rooms have a single door, rooftops are reached by a service stair rather than a crane path, and the building is occupied while the work happens. Modular bolted panel tanks exist for exactly this situation: panels are carried in individually and bolted up in place, so the finished tank can be larger than any opening it passed through. That removes the crane, the roadway closure and, in most cases, the permit complexity of a lift over an occupied street; the full scope is on the rooftop water tank retrofit page. The same property makes replacement work practical: a failing concrete or welded steel tank can be demolished and a modular tank built in the same footprint without opening the roof deck. Where an existing tank is sound but a panel or section has failed, we also supply replacement and expansion panels rather than forcing a full rebuild. Installation for a 20 KL to 500 KL system runs 5 to 14 days depending on capacity and civil readiness, which for an occupied Quezon City building is the number that matters when scheduling around tenants.
Certifications, Warranty and What You Get on Handover
For potable water we specify WRAS-certified panels, rated for potable service up to 65C, with NSF-compliant liners where the application calls for them. Panels are produced under ISO 9001 manufacturer QMS and are TUV SUD tested. FRP panels carry a 3-year warranty and the systems are designed for a 20 to 25 year life. On handover you get a commissioned system, not a delivered pile of panels: the tank assembled and filled, the booster set installed and set to the design pressure, the VFD duplex panel configured with pressure feedback and auto-alternation, and the whole system run and demonstrated. Because supply, install and commissioning sit under one contract with one team, there is no gap between the tank scope and the pump scope for a fault to fall into. TankSmith was founded in 2024 and works nationwide across the Philippines, covering NCR and the rest of Luzon, the Visayas, Mindanao, and the PEZA, SBMA and Clark freeport estates, so the same specification and install standard applies whether the project is in Quezon City or in a Cavite or Batangas industrial estate. To start, send the building type, the floor count, the intended use of the water and any known constraint on the access route, and we will come back with a sized configuration.
Frequently Asked Questions
We install. TankSmith is a turnkey installer, not a delivery-only supplier, so supply, installation and commissioning sit under one contract with one team. That covers the tank itself and, where the project needs it, the booster pump set and VFD duplex control panel as part of the same scope. For a 20 KL to 500 KL system, installation typically runs 5 to 14 days depending on capacity and how ready the civil works are. Handover includes the tank filled and the pressure system set to the design point and demonstrated.
It depends on the draw profile, not the floor area. We build systems from 1,000 liters to 500,000 liters per tank system. Commercial laundry is sized per kilogram of linen per day. Hotels and resorts are sized against occupancy and peak draw. Hospitals and clinics are sized for redundancy plus a code-compliant fire reserve. Food manufacturing is sized against process demand with WRAS-compliant potable specification. We also need the available footprint, the slab or roof deck loading, and the access route before we can commit to a capacity and a configuration.
Yes, and that is the main reason to use modular bolted panels instead of a one-piece tank. Panels are carried in individually, usually up a service stair, and bolted together in position, so the finished tank can be far larger than any door or opening it passed through. No crane, no roadway lift, no opening the roof deck. This also makes replacement practical: a failing concrete or welded steel tank can be removed and a modular tank rebuilt in the same footprint while the building stays occupied.
FRP and GRP bolted panels are the common choice for potable storage in commercial and residential buildings, and FRP carries a 3-year panel warranty with a 20 to 25 year design life. HDG steel (hot-dip galvanized) suits fire reserve and process water where mechanical robustness leads. Stainless steel 304 or 316 is for food manufacturing and applications needing a full stainless wetted surface. For potable duty we specify WRAS-certified panels rated to 65C with NSF-compliant liners where required. In a tight-access retrofit, access route and dead load usually narrow the choice before water quality does.
Yes. We supply and install vertical multistage centrifugal booster pumps in the CDL and CDLF series, SS304 construction, from 0.37 kW to 200 kW, with VFD duplex control panels built on Inovance drives, IP54 rated, with pressure feedback and automatic alternation between pumps. Tank and pump go in under one contract as a single turnkey scope covering mechanical, electrical and commissioning. That matters because pump selection depends on the tank draw-off level and the building static head, so specifying both together is what produces stable pressure on the upper floors.
Yes. Coverage is nationwide Philippines: NCR, the rest of Luzon, the Visayas and Mindanao, including the PEZA, SBMA and Clark freeport estates. Verticals we serve include commercial laundry, hotels and resorts, hospitals and clinics, food manufacturing, warehouses and manufacturing plants, condominiums and high-rise residential, and industrial estates in Cavite and Batangas. The same specification and install standard applies across all of them. TankSmith was founded in 2024 and works as a single accountable team on both the storage side and the pressure side of every project.